Sold: $403 Buyer: USA
Scott CR1 54 cm frame Addict R1 fork carbon Mavic neutral support yellow road
Frame and Wheel is auctioning a Scott CR1 Mavic Neutral Support frame set on the Frame and Wheel ebay Store. The owner purchased the frame set second hand from an individual in 2010. The owner built up the frame and used it for racing and training in 2011. The components were switched out at the end of the 2011 season. The frame and fork has been in storage since then. The current owner has never crashed the frame. It has always been stored indoors. The owner is selling the frame because it is too big for him and he no longer needs it. The frame set features Scott Addict R1 front fork, oversized top tube and down tube, braze-on front derailleur hanger, zero stack head set, light weight and distinctive Mavic Yellow finish. The frame set as shown weighs 3 pounds 1 ounce (1.4 kg). The Mavic serial number on the bottom bracket read 0953. The serial number on the front fork reads ST02K10006120012. The current owner is 5’ 5” with an inseam of 29 inches. Please see 80 additional images of the frame set at Frame and Wheel’s Flickr page. Please see the Frame and Wheel website for more information about the service.
Review of condition
The frame set is in good condition. It is clean and ready for build. There are no cracks, bulges, discolorations, flexing or flaking that raise concerns about the structural integrity of the frame. The rear triangle is in alignment with the the centerline of the frame to within 2.0 mm (the width of a nickel). The rear derailleur hanger is straight and undamaged. The cable stops are riveted securely and clear of obstructions. There is no corrosion in the water bottle bolt holes. The bottom bracket shell is not damaged. The threads in the bottom bracket are not stripped or corroded. There are no cracks, bulges, discoloration, flexing or flaking that raise concerns about the structural integrity of the front fork. The crown race is securely fixed to the front fork. The crown race is not pitted or corroded. The headset cartridge bearings turn smoothly and the headset is complete. The stickers are not peeling.
Frame and Wheel notes the following: There is a 10 mm x 20 mm abrasion on the inside non drive side chain stay from a tire. There is a 20 mm x 15 mm abrasion on the underside of the brake bridge from road grit. There is a 30 mm x 10 mm abrasion on the drive side head tube from a cable. There is a 5 mm x 10 mm chip in the finish on the edge of the non drive side bottom bracket. There are abrasions and scratches between 1 mm and 20 mm on the top tube, the down tube, the chain stays and the seat stays. There is wear around the drop outs. There is wear around the cable stops. There is wear on the front derailleur hanger. There is road wear under the front fork crown.
Frame and Wheel conclusion
Frame and Wheel’s view is that this Scott CR1 will suit the road enthusiast who seeks to upgrade to a practical and light carbon frame, and who is not too picky about cosmetics. The frame set shows signs of wear and presumably has spent some time on the roof of a Mavic neutral support vehicle and in the Mavic shop before joining the previous and current owner. Nevertheless, the frame set is in good condition and ready to return to the road. The new owner will notice the frame’s light weight and will most likely be the only rider in the group on a yellow frame set, unless of course, Bradley Wiggins is on the ride too. A great opportunity to obtain a unique frame set at an attractive valuation.
Specifications:
Brand: Scott
Model: CR1/ Mavic Neutral Support
Size: MD / 54 cm
Model year: 2007 estimated
Color: Mavic Yellow
Frame material: carbon
Frame serial number: Mavic number: 0953
Fork material: carbon
Fork model: Scott Addict R1
Design: sloping road
Wheel size: 700c
Frame and Wheel rating: Good condition
Frame and Wheel PAAS charge: $50.00
Following measurements are by Frame and Wheel
Total weight: 1.4 kg / 3 pounds 1 ounce (frame: 990 g fork: 310 g headset bearings and components: 100 g).
Center of BB to top of seat tube: 54 cm (c-t)
Effective top tube length: 53.5 cm (c-c)
Head tube length: 15 cm
Following measurements are by Scott
Frame size: MD / 54 cm
Head tube angle: 73.0 degrees
Head tube length: 15.6 cm
Horizontal top tube length: 54.5 cm
Seat tube angle: 74.0 degrees
BB center top top of seat tube: 54.0 cm
BB center to top tube center: 48.0 cm
Chain stay: 40.5 cm
BB offset: 6.7 cm
Stand over height: 78.4 cm
Wheel base: 98.1 cm
Reach: 38.3 cm
Stack: 56.5 cm
Front fork
Model: Scott Addict R1 carbon drop outs, safety tabs
Weight: 310 g
Front fork length: 38.0 cm
Steer tube serial number: ST02K10006120012
Crown serial number: none
Crown material: carbon
Steer tube material: carbon
Steer tube diameter: 1 1/8 inch
Steer tube length: 20 cm (base of crown race to top) cut
Crown race diameter: 30 mm
Drop outs: carbon
Brake type: recessed caliper
Other specifications
Seat post collar diameter: 34.9 mm
Seat post diameter: 31.6 mm
Bottom bracket: English thread 1.37 x 24 68 mm
Cane Creek Standardized Headset Identification System (SHIS): ZS44/28.6 ZS44/30.0
Headset: seal cartridge bearings (upper) 41.8 x 30.2 x 36 x 45 (1 1/8 inch) (lower) 41.8 x 30.2 x 36 x 45 (1 1/8 inch) Easton top cap, Ritchey top cover and compression ring
Spacers: none
Drop outs: rear: vertical alloy
Rear derailleur hanger: alloy non-replaceable
Front derailleur hanger: riveted for braze-on
Cabling: external top tube and down tube, external on chain stay
Rear fork spacing: 130 mm
Front fork spacing: 100 mm
No comments:
Post a Comment