2006 Trek 5.2 Madone 54cm frame set English BB Bontrager carbon fork road

Sold: $400  Buyer: USA

2006 Trek 5.2 Madone 54cm frame set English BB Bontrager carbon fork road

Frame and Wheel is offering a Trek 5.2 Madone frame set on the Frame and Wheel eBay Store. The frame was obtained new. It was never ridden. The bike was parted out and the frame set has been in storage. It has had only one owner. The owner is selling because he does not need it. The frame set features Bontrager Race X Lite carbon front fork and English thread bottom bracket. The frame features cut away seat post, aero down tube, external cup head tube bore, braze-on front derailleur hanger, metallic grey finish and the specter of Lance Armstrong. The frame set as shown weighs 4 pounds 3 ounce (1.9 kg). The frame serial number reads WL3405149. The front fork serial number reads 230279. There are 70 images of the frame set on Frame and Wheel’s Flickr page. Please take a look. No head set or seat post included.

Review of condition

The frame set is in very good condition. It is clean and ready for build. There are no bends, bulges or cracks that raise concerns about the structural integrity of the frame. The rear triangle is in alignment with the centerline of the frame. The rear derailleur hanger is undamaged. There are no obstructions in the brake cable openings. There is no corrosion in the water bottle bolt holes. The bottom bracket shell is not damaged.  The bottom bracket threads are not stripped or corroded. The front derailleur hanger is not damaged and it is attached securely. There are no cracks, bulges, discoloration, flexing or flaking that raise concerns about the structural integrity of the front fork. The crown race is not damaged. The seat clamp works properly. Frame and Wheel notes that part of the chain guard sticker is peeling

Specifications:

Brand: Trek

Model: 5.2 Madone

Model year: 2006

Size: 54 cm 

Color: grey metallic

Frame material: carbon

Frame serial number: WL3405149

Fork material: carbon

Fork model: Bontrager Race X Lite

Design: traditional top tube 

Series: road

Wheel size: 700c

Frame and Wheel rating: Very good condition

Following measurements are by Frame and Wheel

Total weight: 1.9 kg / 4 pounds 3 ounces (frame: 1,400 fork: 440 g fittings: 60 g).

Center of BB to top edge of seat tube: 54.0 cm (c-t)

Effective top tube length: 54.0 cm (c-c)

Head tube length: 10.4 cm

Front fork

Brand: Bontrager

Model: Race X Lite

Weight: 440 g

Serial number: 230279

Crown material: carbon

Steer tube material: aluminum

Steer tube diameter: 1 1/8 inch (28.0 mm)

Steer tube length: 19.5 cm (base of crown race to top) 

Crown race diameter: 30 mm

Drop outs: alloy with safety tabs

Brake type: center pull cantilever

Other specifications

Bottom bracket: English

Cane Creek Standardized Headset Identification System (SHIS): EC34/28.6  EC34/30.0

Headset: none

Spacers: none

Drop outs: rear: vertical alloy front: standard alloy

Rear derailleur hanger: replaceable

Front derailleur hanger: screw on for braze-on

Cabling: external

Rear fork spacing: 130 mm

Front fork spacing: 100 mm

Vintage Look Bernard Hinault Equipe 56cm steel frame fork English BB Reynolds 753 Cinelli

Sold: $810  Buyer: United Kingdom

Vintage Look Bernard Hinault Equipe 56cm steel frame fork English BB Reynolds 753 Cinelli

Comments

The frame has been in storage. The frame set as shown weighs 5 pounds 11 ounces (2.6 kg). Serial number is B45 S45.

Review of condition

The rear triangle is 4.0 mm left of center (the width of three pennies). There is a 10 mm x 60 mm area of corrosion on the drive side top tube. There is corrosion around the cable guides on the top tube. There is wear on the inside and outside surfaces of the chain stays. There is wear on the head tube. There is wear and corrosion on the bottom of the bottom bracket. There is corrosion around the water bottle mounts. There is wear on the drop outs. The seat collar bolt is missing.

Specifications:

Brand: Look

Model: Bernard Hinault Equipe

Model year: Mid 1980s

Size: 56.0 cm

Color: Look panels on metallic off white

Frame material: steel Reynolds 753

Frame serial number: B45 S45

Fork material: steel

Steer tube diameter: 1 inch to 1 inch

Design: horizontal top tube 

Series: road

Wheel size: 700c

Frame and Wheel rating: Good condition

Following measurements are by Frame and Wheel

Total weight: 2.6 kg / 5 pounds 11 ounces 

Center of BB to top edge of seat tube: 56.0 cm (c-t)

Effective top tube length: 54.0 cm (c-c)

Head tube length: 13.5 cm

Other specifications

Bottom bracket: English

Cane Creek Standardized Headset Identification System (SHIS): EC30/25.4  EC30/26

Headset: Ritchey Logic

Spacers: na

Drop outs: vertical

Rear derailleur hanger: non replaceable

Front derailleur hanger: clamp-on

Cabling: external

Rear fork spacing: 130 mm

New 2014 Mavic Cosmic CXR 80 T tubular wheelset Yksion 700x23mm tires Shimano 10/11-speed 16/20 spoke Mavic SSC hubs 700c road time trial

Sold: $2,500  Buyer: USA 

New 2014 Mavic Cosmic CXR 80 T tubular wheelset Yksion 700x23mm tires Shimano 10/11-speed 16/20 spoke Mavic SSC hubs 700c road time trial

Frame and Wheel is offering a Mavic Cosmic CXR 80 T tubular wheel set on the Frame and Wheel eBay Store. The wheels were purchased new in 2014. They were never ridden. They were used for display purposes. They have had only one owner. The owner is selling them because he no longer needs them. The wheels feature carbon tubular rims, CXR 01 Blades, Shimano 10/11-speed free hub, Mavic SSC hubs, 80 mm rim depth, 27 mm rim width, 16 (F) / 20 (R) spoke count, Mavic stainless steel skewers, black Cosmic stickers, nude carbon finish, Mavic quality and deep dish cool. The wheels as shown weigh 5 pounds 3 ounces (2.4 kg). There are 40 images of the wheel set at Frame and Wheel’s Flickr page. Ships in new custom wheel boxes. Original instructions included.

Review of condition

The wheels are in excellent condition. They are new. They are clean. They are ready to ride. The hubs spin smoothly and freely. The spokes are tight and straight. The rims are round and the wheels are true. There is no lateral or vertical variation in the rims when placed in a truing stand. There are no cracks, flexing or flaking in the carbon rim or the carbon shell. There are no notches in the free hub body splines from a cassette. There are no cracks in the hub bodies. There are no cracks in the flanges of the hubs. There is no corrosion on the spokes, the nipples or on the skewers. The stickers are not peeling off. The skewers are straight and complete. Frame and Wheel notes that there is only one valve extender included.

Specifications

Front

Brand: Mavic

Model: Cosmic CXR 80 T

Year: 2014

Rim material: carbon

Rim shell material: carbon

Series: road time trial

Type: tubular

Rim serial number: AF21570018

Size: 700c

Weight with tire and skewer: 2 pound 6 ounce / 1.1 kg

Spoke count: 16

Spokes: steel bladed black external nipples

Lacing: radial

Hub: Mavic SSC

Hub material: carbon aluminum

Skewer: Mavic stainless steel

Rim depth: 80.0 mm (measured by Frame and Wheel)

Rim width: 27.0 mm (measured by Frame and Wheel)

Tire: Yksion Griplink 700 x 23 mm

Over Lock Nut Dimension: 100 mm

Finish: Nude carbon

Frame and Wheel rating: Excellent condition

Rear

Brand: Mavic

Model: Cosmic CXR 80 T

Model year: 2014

Rim material: carbon

Rim shell material: carbon

Type: tubular

Series: road time trial

Rim serial number: AR21530023

Size: 700c

Rear wheel weight with tire, skewer: 2 pounds 13 ounces / 1.3 g

Spoke count: 20

Spokes: steel bladed black external nipples

Lacing: 1-cross drive side radial non drive side

Hub: Mavic SSC

Hub material: carbon aluminum

Skewer: Mavic stainless steel

Rim depth: 80.0 mm (measured by Frame and Wheel)

Rim width: 27.0 mm (measured by Frame and Wheel)

Tire: Yksion Griplink 700 x 23 mm

Over Lock Nut Dimension: 130 mm

Free hub: Shimano 10 / 11 speed

Free hub body width: 37.0 mm

Finish: Nude carbon

Frame and Wheel rating: Excellent condition

2012 Zipp 808 Firecrest tubular carbon wheelset Shimano 10-speed 16/20 spoke Zipp 88/188 hub

Sold: $1,151  Buyer: Ireland

2012 Zipp 808 Firecrest tubular carbon wheelset Shimano 10-speed 16/20 spoke Zipp 88/188 hub

Frame and Wheel is offering Zipp 808 Firecrest tubular wheels on the Frame and Wheel eBay Store. The wheels were purchased new in 2012. They were used for demonstration and display purposes. They were glued up and ridden only a few times. They have been in storage. They have had only one owner. The owner is selling them because he no longer uses them. The wheels feature carbon tubular rim, carbon shell, ABLC dimpled rim shell surfaces, Shimano 10-speed free hub, Zipp 88 front hub and Zipp 188 rear hub, 82 mm rim depth, 26 mm rim width, 16 (F) / 20 (R) spoke count, adjustable hubs, Zipp stainless steel skewers, Beyond Black lettering, aero design and Zipp 808 cool. The wheels as shown weigh 3 pounds 8 ounces (1.6 kg). There are 40 images of the wheel set at Frame and Wheel’s Flickr page. Ships in new custom wheel boxes.

Review of condition

The wheels are in very good condition. They are clean and they are ready to ride. The hubs spin smoothly and freely. The spokes are tight and straight. The rims are round and the wheels are true. There is no lateral or vertical variation in the rims when placed in a truing stand. There are no cracks, flexing or flaking in the carbon rim or the carbon shell. There is only one notch in the free hub body splines from a cassette. There are no cracks in the hub bodies. There are no cracks in the flanges of the hubs. There is no corrosion on the spokes, the nipples or on the skewers. The stickers are not peeling off. The skewers are straight and complete. There is no glue no the rims. Frame and Wheel notes that there is light wear on the braking surfaces of rims.

11-speed conversion

The Zipp 188 rear hub can be converted to 11-speed. The conversion requires a new axle, end cap, free hub body and spacer and a re-dish of the wheel. The upgrade is available through authorized Zipp dealers. Please see this link to Zipp website for more information about the conversion.

Frame and Wheel conclusion

Frame and Wheel’s view is that this Zipp 808 Firecrest tubular wheel set will make an excellent choice for the dedicated road cyclist who seeks a set of tubular wheels for racing and training. The wheel set shows no wear and it is effectively new. These wheels will materially transform the weight, look and feel of any road bike and will help trigger triumphant performance revelations for the new owner. An excellent opportunity to obtain one of Zipp’s coolest wheel sets. 

Specifications

Front

Brand: Zipp

Model: 808 Firecrest

Year: 2012

Rim material: carbon VCLC

Rim shell material: carbon ABLC

Series: road time trial

Type: tubular

Rim serial number: na

Hub serial number: Z0701120025

Size: 700c

Weight with skewer: 1 pound 10 ounce / 740 g

Spoke count: 16

Spokes: steel bladed black external nipples

Lacing: radial

Hub: Zipp 88

Hub material: alloy

Skewer: Zipp stainless steel

Rim depth: 82.0 mm (measured by Frame and Wheel)

Rim width: 26.0 mm (measured by Frame and Wheel)

Tire: not included

Over Lock Nut Dimension: 100 mm

Finish: Beyond Black

Frame and Wheel rating: Very good condition

Rear

Brand: Zipp

Model: 404 Firecrest

Model year: 2012

Rim material: carbon VCLC

Rim shell material: carbon ABLC

Type: tubular

Series: road time trial

Rim serial number: na

Hub serial number: Z030412-0241

Size: 700c

Rear wheel weight with skewer: 1 pounds 14 ounces / 840 g

Spoke count: 20

Spokes: steel bladed black external nipples

Lacing: 1-cross non drive side radial drive side

Hub: Zipp 188

Hub material: alloy

Skewer: Zipp stainless steel

Rim depth: 82.0 mm (measured by Frame and Wheel)

Rim width: 26.0 mm (measured by Frame and Wheel)

Tire: not included

Over Lock Nut Dimension: 130 mm

Free hub: Shimano 10 speed

Free hub body width: 34 mm

Finish: Beyond Black

Frame and Wheel rating: Very good condition

Zipp 900 Tubular disc wheel carbon Zipp 182 hub 202P free hub Shimano 10-speed Zipp 909

Sold: $332  Buyer: USA

Zipp 900 Tubular disc wheel carbon Zipp 182 hub 202P free hub Shimano 10-speed Zipp 909

Frame and Wheel is offering a Zipp 900 Tubular disc wheel on the Frame and Wheel eBay Store. The wheel features tubular rim, ABLC (Aerodynamic Boundary Layer Control) dimpled surface, 21 mm rim width, Zipp 182 disc hub with 202P free hub body (Shimano 10 speed), track wheel adaptability, dual side valve opening, Zipp 909 sticker set and early Zipp disc cool. The wheel as shown weighs 2 pounds and 3 ounces (1.0 kg). Ships in custom wheel box. No skewer. Cannot be converted to 11-speed.

Review of condition

The wheel is in good condition. It is clean and ready to ride. There is no cracking, flexing, discoloration or flaking in the rim. The hub spins freely and smoothly. There is no play in the hub. The valve opening is undamaged. The stickers are on securely. Frame and Wheel notes the following. The wheel shows lateral variation when placed in the truing stand of less than 1.5 mm (the width of a penny). There is a 15 mm x 20 mm abrasion from a removed sensor magnet on the non drive side of the disc surface. There is a 4 mm x 6 mm shallow puncture in the non drive side disc surface near the rim. There are two 5 mm x 18 mm indentations in the drive side disc surface. The free hub body show cassette wear. There is light surface corrosion on the hub and axle. There is light wear on the braking surface of the rim. The pawls spin loudly. There is some bubbling on the stickers.

Specifications

Brand: Zipp

Model: 900 Tubular / Zipp 909

Model year: 2005 estimated

Rim material: carbon

Rim shell material: carbon ABLC

Series: time trial / triathlon

Type: tubular

Serial number: na

Size: 700c

Weight: 2 pounds 3 ounces / 1.0 kg

Hub: Zipp 182 with Zipp 202P free hub body

Skewer: none

Rim width: 21 mm (outside to outside measured by Frame and Wheel)

Tire: not included

Over Lock Nut Dimension: 130 mm

Finish: White lettering on red banner”

Free hub body: Shimano / SRAM 

Speed: 10 speed

Free hub body length: 35 mm

Valve opening: 26 mm x 40 mm

Frame and Wheel rating: Good condition

Classic 1990s Rhygin Metax Stainless Steel 57.5 cm road frame English BB Dura-Ace headset 700c

Sold: $455  Buyer: USA

Classic 1990s Rhygin Metax Stainless Steel 57.5 cm road frame English BB Dura-Ace headset 700c

Comments

The frame has been in storage. The frame as shown weighs 3 pounds 12 ounces. Serial number is 347. There are 40 images on the Frame and Wheel Flickr Page

Review of condition

Wear on seat tube from front derailleur hanger clamp. Head tube shows wear from cable rub. Head tube stickers shows wear. Top tube stickers show wear. Down tube stickers show wear. Light wear on outside surface of drive side chain stay. Light surface corrosion inside cups. Wear around drop outs.

Specifications:

Brand: Rhygin

Model: Metax Stainless Steel

Model year: 1990s

Size: 57.5 cm 

Color: chrome

Frame material: stainless steel

Frame serial number: 347

Fork material: stainless steel

Fork model: na

Design: horizontal top tube 

Series: road

Wheel size: 700c

Frame and Wheel rating: Good condition

Following measurements are by Frame and Wheel

Total weight: 1.7 kg / 3 pounds 12 ounces 

Center of BB to top edge of seat tube: 57.5 cm (c-t)

Effective top tube length: 56.0 cm (c-c)

Head tube length: 12.9 cm

Other specifications

Bottom bracket: English

Cane Creek Standardized Headset Identification System (SHIS): EC30/25.4  EC30/26

Headset: na

Spacers: na

Drop outs: vertical

Rear derailleur hanger: non eplaceable

Front derailleur hanger: clamp on

Cabling: external

Rear fork spacing: 130 mm

Classic 2004 Cervelo P3 54cm aluminum frame set English BB carbon fork triathlon tt

Sold: $292  Buyer: USA

Classic 2004 Cervelo P3 54cm aluminum frame set English BB carbon fork triathlon tt

Frame and Wheel is offering a Cervelo P3 aluminum frame set on the Frame and Wheel eBay Store. The frame set was purchased second hand in 2008. The current owner used it for training and triathlons. The owner is selling it because has another bike. The frame set features carbon front fork, Cervelo dual position seat post, Cane Creek head set and English thread bottom bracket. The frame features aluminum construction, aero down tube, aero seat tube, aero seat stays, internal top tube and down tube cabling, horizontal rear drop outs and iconic Cervelo cool. The frame set as shown weighs 5 pounds 10 ounce (2.6 kg). The frame serial number reads 04DM000355. The front fork serial number reads NO. 924300. The owner is 6 feet tall with an inseam of about 33 inches. There are 110 images of the frame set on Frame and Wheel’s Flickr page. Please take a look. Ships in new custom frame set box.

Review of condition

The frame set is in good condition. It is clean and ready for build. There are no bends, bulges or cracks that raise concerns about the structural integrity of the frame. The rear triangle is in alignment with the centerline of the frame. The rear derailleur hanger is undamaged. There are no obstructions in the shifting and brake cable openings. There is no corrosion in the water bottle bolt holes. The bottom bracket shell is not damaged.  The bottom bracket threads are not stripped or corroded. The front derailleur hanger is not damaged and it is attached securely. There are no cracks, bulges, discoloration, flexing or flaking that raise concerns about the structural integrity of the front fork. The crown race is not damaged. There are no cracks, bulges, discoloration, flexing or flaking that raise concerns about the structural integrity of the seat post. The seat clamp works properly.

Frame and Wheel notes the following. The frame set shows wear. There is a 15 mm x 15 mm abrasion and dent on the drive side top tube on the “V” in Cervelo. There is a 10 mm x 12 mm chip in the finish on the drive side head tube. There is an 8 mm x 8 mm chip in the finish on the non drive side head tube. There are abrasions on the head tube from cable rub. There is a 10 mm x 50 mm scratch on the bottom of the bottom bracket shell. There is a 7 mm x 35 mm abrasion on the outside surface of the non drive side chain stay. There is a 12 mm x 12 mm abrasion at the top of the seat post. There is a 5 mm x 5 mm chip in the finish on the front of the seat tube. There is a 2 mm x 11 mm scratch on the outside surface of the non drive side seat stay. There is a 10 mm x 10 mm abrasion on the inside surface of the non drive side chain stay. There is wear and abrasion on the outside surface of the drive side chain stay. There is wear around the rear drop outs. 

Specifications:

Brand: Cervelo

Model: P3

Model year: 2004

Size: 54 cm 

Color: red white

Frame material: aluminum

Frame serial number: 04DM000355

Fork material: carbon

Fork model: Cervelo

Design: traditional top tube 

Series: time trial triathlon

Wheel size: 700c

Frame and Wheel rating: Good condition

Following measurements are by Frame and Wheel

Total weight: 2.6 kg / 5 pounds 10 ounces (frame: 1,600 fork: 540 g seat post: 310 g headset and fittings: 150 g).

Center of BB to top edge of seat tube: 54.0 cm (c-t)

Center of BB to center rails of seat post when set at minimum insert : 73.5 cm (c-c)

Effective top tube length: 57.5 cm (c-c)

Head tube length: 11.5 cm

Seat post length: 6.0 cm (bottom of seat post to minimum insert)

Seat post length: 20.0 cm (minimum insert to center rails)

Seat post length: 26.0 cm (bottom of seat post to center rails)

Seat post length: 31.0 cm (bottom of seat post to top of seat)

Front fork

Brand: Cervelo

Model: Cervelo

Weight: 540 g

Serial number: NO. 924300

Crown material: aluminum

Steer tube material: aluminum

Steer tube diameter: 1 1/8 inch (28.0 mm)

Steer tube length: 21.0 cm (base of crown race to top) previously cut

Crown race diameter: 30 mm

Drop outs: carbon with safety tabs

Brake type: cantilever

Rake: 4.3 cm

Seat post:

Brand: Cervelo

Seat clamp type: double bolt

Seat clamp material: aluminum

Head material: aluminum

Seat clamp bed dimensions: 45 mm x 35 mm

Weight: 310 g

Offset: 20 mm

Seat post diameter: aero

Seat post length: 6.0 cm (bottom of seat post to minimum insert)

Seat post length: 20.0 cm (minimum insert to center rails)

Seat post length: 26.0 cm (bottom of seat post to center rails)

Seat post length: 31.0 cm (bottom of seat post to top of seat)

Other specifications

Bottom bracket: English

Cane Creek Standardized Headset Identification System (SHIS): IS41/28.0  IS41/30.0

Headset: Cane Creek bearing cover Cervelo top cap

Spacers: 3 x 10 mm 2 x 5 mm 1 x 2 mm aluminum

Drop outs: rear: horizontal front: standard

Rear derailleur hanger: non replaceable

Front derailleur hanger: rivet mounted alloy for braze-on

Cabling: internal top tube, down tube external chain stay

Rear fork spacing: 130 mm

Front fork spacing: 100 mm

CycleOps Power Tap Pro + Stan’s Notubes Alpha 340 clincher wheelset Shimano 10 speed wireless

Sold: $361  Buyer: United Kingdom

CycleOps Power Tap Pro + Stan’s Notubes Alpha 340 clincher wheelset Shimano 10 speed wireless

Frame and Wheel is offering a CycleOps Power Tap Pro + Stan Notubes Alpha 340 wheel set on the Frame and Wheel eBay Store. The owner purchased the CycleOps hubs new in 2011. They were built up with the Stan’s Notubes rims in 2013. They were used for training. They have been in storage for the past year. The owner is selling the wheels because he no longer uses them. The wheels feature clincher or tubeless tire compatible rims, 24 (F) / 32 (R) spoke count, 23 mm rim depth, 20 mm rim width, wireless CycleOps Power Tap Pro + hub, Shimano 10-speed free hub body, CycleOps control unit and durable construction. The wheel set as shown weighs 3 pounds and 14 ounces (1.8 kg). There are 50 images of the wheel set at Frame and Wheel’s Flickr page. Please take a look. Ships in custom wheel boxes. No skewers!

Review of condition

The wheel set is in very good condition. It is clean and ready to ride. The wheels are true. The hubs spin freely and smoothly. The batteries in the control unit are new. The control unit works properly and scrolls all of its functions. The batteries in the hub are new. The hub sensor works properly. The power tap hub body is not damaged. The hub flanges are not cracked. Frame and Wheel notes the following. The control unit battery cover shows wear. There are notches on the free hub body from a cassette. The braking surfaces of the rim show wear.

Demonstration Video

Specifications

Brand: Stan’s Notubes

Model: Aplha340 ZTR

Rim model year: 2013

Type: clincher / tubeless

Weight: 3 pounds 14 ounces (1.8 kg)

ETRTO: 622 x 15C

Series: Road

Size: 700c

Spoke count: 24 (F) / 32 (R)

Spokes: steel black external nipples

Hub: CycleOps Pro + (R) CycleOps (F)

Skewer: none

Rim depth: 23 mm 

Rim width: 20 mm

Over Lock Nut Dimension: 100 mm (F) / 130 mm (R)

Free hub body: Shimano 10-speed

Finish: black

Frame and Wheel rating: Very good condition

Hub specifications

Brand: CycleOps

Model: Pro +

Model year: 2011

Type: Wireless

Color: black

Serial number: 00047296

Frequency: ANT +.

Power Tap features and functionality

Coded heart rate

Power

Heart Rate

Cadence

Speed 

Distance

Time

Programmable Odometer

Customizable display

USB download

Items included:

Stan’s Notubes Alpha340 ZTR clincher tubelss wheels set with CycleOps wireless PowerTap Pro +

CycleOps PowerTap CPU Version Pro 7.6

Handle bar mount kit

Computer dock with USB adapter

Heart rate monitor and strap strap

Hub cover removal tool

2007 Mavic Cosmic Carbone Premium clincher Mavic hubs 16/20 spokes 700c Shimano 10 / 11-speed road

Sold: $550 Buyer: USA

2007 Mavic Cosmic Carbone Premium clincher Mavic hubs 16/20 spokes 700c Shimano 10 / 11-speed road

Frame and Wheel is offering a Mavic Cosmic Carbone Premium wheel set on the Frame and Wheel eBay Store. The wheels were purchased new. They have had only one owner. They were raced twice and then placed in storage. The wheels feature aluminum clincher rims, carbon shell, steel aero spokes, 16/20 spoke count (F/R), 52 mm rim depth, 19 mm rim width, Mavic hubs, Mavic skewers, Shimano free hub body that is compatible with 10-speed with spacer and 11-speed (without spacer), aero design and Mavic provenance. The wheels as shown weigh 4 pounds 1 ounces (1.8 kg). There are 40 images of the wheel set at Frame and Wheel’s Flickr page. Please take a look. Ships in new custom wheel boxes. Spacer not included.

Review of condition

The wheels are in very good condition. They are clean and ready to ride. The wheels show less than 0.5 mm variation when placed in a truing stand. The wheels are round. There are no cracks, holes or flaking in the carbon shell. There are no notches in the free hub body splines from a cassette. There are no cracks in the hub bodies. There are no cracks in the flanges of the hubs. There is no corrosion on the spokes, the nipples or on the skewers. The stickers are not peeling off. The skewers are straight and complete. The spokes are tight. The hubs spin smoothly. The flanges are not cracked. Frame and Wheel notes the following. The braking surfaces of the rims show light wear. A highly functional set of aero clincher rims for training and competition showing immaterial signs of wear.

Specifications

Brand: Mavic

Model: Cosmic Carbone Premium

Model year: 2007

Type: clincher

Weight with skewers: 4 pounds 1 ounces (1.8 kg)

ETRTO: 622 x 14

Series: Road

Size: 700c

Spoke count: 16 (F) / 20 (R)

Spokes: steel bladed black external

Hub: Mavic Cosmic Carbone Premium

Skewer: Mavic

Rim depth: 52 mm 

Rim width: 19 mm

Over Lock Nut Dimension: 100 mm (F) / 130 mm (R)

Free hub body: Shimano 10 speed with spacer 11 speed without spacer

Finish: nude carbon with gray lettering

Frame and Wheel rating: Very good condition

2011 Mavic Ksyrium Elite clincher Mavic hubs 18/20 spokes 700c Shimano 10 / 11-speed road

Sold: $182.50  Buyer: USA

2011 Mavic Ksyrium Elite clincher Mavic hubs 18/20 spokes 700c Shimano 10 / 11-speed road

Frame and Wheel is offering a Mavic Ksyrium Elite wheel set on the Frame and Wheel eBay Store. The wheels feature aluminum clincher rims, steel aero spokes, 18/20 spoke count (F/R), 20 mm rim depth, 19.5 mm rim width, Mavic Ksyrium Elite hubs, Zipp front skewer, OEM rear skewer, Shimano free hub body that is compatible with 10-speed (with washer and 11-speed (without washer), durable construction and Mavic provenance. The wheels as shown weigh 3 pounds 11 ounces (1.7 kg). A fine choice for training. There are 40 images of the wheel set at Frame and Wheel’s Flickr page. Please take a look. Ships in new custom wheel boxes.

Review of condition

The wheels are in good condition. They are clean and ready to ride. The rear wheel shows no lateral variation when placed in a truing stand. The front wheel shows lateral variation of less than 1.0 mm when placed in a truing stand. The wheels are round. The spokes are tight. They spin smoothly. The flanges are not cracked. Frame and Wheel notes the following. There is 1 mm x 10 mm scratch on the side of the front rim. There is a 2 mm x 4 mm abrasion on the sticker near to it. The braking surfaces of the rims show wear. The free hub body shows light wear from a cassette. The skewer ends show wear.

Specifications

Brand: Mavic

Model: Kysrium Elite

Model year: 2011

Type: clincher

Weight with skewers: 3 pounds 11 ounces (1.7 kg)

ETRTO: 622 x 15C

Series: Road

Size: 700c

Spoke count: 18 (F) / 20 (R)

Spokes: steel bladed black external

Hub: Mavic Ksyrium Elite

Skewer: Zipp (F) OEM (R)

Rim depth: 20 mm 

Rim width: 19.5 mm

Over Lock Nut Dimension: 100 mm (F) / 130 mm (R)

Free hub body: Shimano 10 speed with washer 11 speed without washer

Finish: black with silver lettering

Frame and Wheel rating: Good condition