Sold: $3,051 Buyer: USA
2011 Serotta Legend SE 60cm titanium carbon
Frame and Wheel is auctioning a custom Serotta Legend SE on the Frame and Wheel eBay Store. The bicycle was ordered and purchased new at Fitwerx2 in Peabody, Massachusetts in February 2011. The bicycle was used for recreational and enthusiastic riding in 2011. The road computer shows about 660 miles. It has been in storage indoors for most of 2012. The bicycle has never been crashed. The owner is selling the bicycle because his shoulder will soon require surgery and after that surgery, he cannot risk a fall from a bike. The frame set features triple butted titanium tubes, titanium drop outs, Serotta Composites F3 carbon front fork (8.5 stiffness), Serotta Composites Carbon wishbone seat stays, ovalised down tube, external cup Chris King NoThreadSet, carbon band front derailleur hanger and brazed-on cable stops. The bicycle features Shimano Ultegra 6700 “Duotone Silver” group set, 3T Ergonova alloy handlebars with extra padded handlebar tape, 3T ARX-Pro alloy stem, Mavic Ksyrium Elite clincher wheel set with Continental Grand Prix Four Season tires, Thomson Elite alloy seat post, Specialized Romin seat, CateEyeV2C wireless road computer, Serotta seat post clamp, nude titanium finish and Serotta provenance. The bicycle as shown weighs 17 pounds 14 ounces (8.1 kg). The serial number on the bottom of the bottom bracket reads LS XI 548. The serial number on the front fork reads C LS X100548. The owner is 6’ 4” with an inseam of 34 inches. Stand over is 85.1 cm. Park Tool frame pump included. Pedals not included. There are 140 detailed images of the bicycle at Frame and Wheel’s Flickr page. Please take a look.
Review of condition
The bicycle is in very good condition. It is clean and ready to ride. The shifting is precise and complete in all twenty gears. The brakes activate easily and grip well. There is 5 mm of pad remaining on the wear indicators. The cable housing and cables are fresh. The wheels are true and round and they spin freely and smoothly. There are no dents or cracks in the rim or the wall of the wheels. The spokes are straight and tight. There is no corrosion on the spokes. The hub flanges are not cracked. The tire treads are fresh and the tires hold pressure. There are no dents, bends or bulges that raise concerns about the structural integrity of the frame. There is no road wear on the bottom of the down tube, the back of the seat tube or on the inside surfaces of the chain stays. The rear triangle is in alignment with centerline of the frame. The rear derailleur hanger is straight and undamaged. The front derailleur hanger band is not cracked or damaged and it is secured firmly to the seat tube. There is no discoloration, bulging, flexing or flaking that raise concerns about the structural integrity of the front fork or the seat stays. The steer tube does not show any cracks or bulges. The crown race is secured firmly. The head set is complete and the cartridge bearings turn smoothly. There is no play in the bottom bracket. There is no corrosion in the bolts on the expander bolt, the seat post or in the water bottle cage bolt holes. The cable stops are not damaged or blocked. The handlebars are not bent and the bar tape is fresh. The chain does not read 0.75 or 1.0 on the chain wear tool. The Cateye road computer works properly. Frame and Wheel notes the following. There is a 1 mm x 30 mm scratch on the underside of the front fork crown from road wear. The braking surfaces of the rims show wear. The chain ring teeth show wear. The rear wheel shows variance of less than 1 mm in the truing stand.
Frame and Wheel conclusion
Frame and Wheel’s view is that this Serotta Legend SE will make an excellent choice for the large and powerful cyclist who appreciates the smoothness of Serotta titanium carbon hybrid frame sets, the versatility of Shimano Ultegra 10 speed compact gearing and the performance of Mavic Kysrium wheels. The bicycle shows immaterial signs of wear and is effectively a new bicycle with many years of riding remaining in its titanium and carbon tubes. The nude titanium and Duotone Silver finish on the Ultegra components give this bicycle a distinctive metallic voice that speaks quietly but firmly of its strength and durability as well as its artisan heritage in the foundries of Serotta Bicycles. The new owner will agree that the bike does not need any lettering. It speaks for itself. A rare and excellent opportunity to obtain a truly one of a kind bicycle.
Specifications:
Brand: Serotta
Model: Legend SE
Model year: 2011
Size: 60 cm
Color: Matte titanium finish no lettering
Frame material: titanium
Frame design: sloping
Frame serial number: LS XI 548
Fork design: standard aero blade
Fork material: carbon
Fork model: F3 Serotta Composites Carbon Fork 8.5 stiffness
Fork serial number: C LS X100548
Wheel size: 700c
Frame and Wheel rating: Very good condition
Frame and Wheel PAAS charge: $80.00
Following measurements are by Frame and Wheel
Total weight with wheels: 17 pounds 9 ounces (7.8 kg)
Total weight without wheels: 12 pounds (5.5 kg)
Front wheel weight with skewer, tire and tube: 2 pounds 7 ounces (1.1 kg)
Rear wheel weight with skewer, tire, tube and cassette: 3 pounds 2 ounces (1.2 kg)
Center of BB to top of seat tube: 60 cm
Effective top tube: 56 cm (c-c)
Seat post length from bottom to center rails: 33.0 cm
Stand over height from middle of top tube: 85.1 cm
Bottom bracket height: 27.3 cm
Bottom bracket width: 68 mm
Head tube length: 21.5 cm
Rear chain stay: 42.0 cm
Down tube: 64.0 cm
Wheelbase: 102.8 cm
Front fork
Brand: Serotta Composites
Model: F3
Model year: 2011
Weight: 440 g (weighed by Frame and Wheel)
Length: 37.5 cm
Serial number: C LS X100548
Steer tube material: carbon
Steer tube diameter: 1 1/8 inch
Steer tube length: 30.8 cm (base of crown race to top)
Crown race diameter: 30 mm
Drop outs: titanium
Safety tabs: yes
Brake type: caliper recessed bolt
Rake: 47 mm
Stiffness: 8.5
Handlebar
Brand: 3T
Model: Ergonova Pro
Material: alloy
Width (c-c): 44.0 cm
Bar clamp diameter: 31.8 mm
Drop: 123 mm
Reach: 77 mm
Bar tape: Black Cinelli
Stem
Brand: 3T
Model: ARX Pro
Weight: 139 g (Measured by Frame and Wheel)
Material: alloy
Length: 100 mm
Rise: 6 / 84 degrees
Steer tube diameter: 28.6 mm or 1 1/8 inch
Bar clamp diameter: 31.8 mm
Collar stack height: 40 mm
Face plate: alloy four bolts
Headset
Brand: Chris King
Model: NoThreadSet
Steer tube diameter: 1 1/8 inch
Type: External Cup
Cane Creek Standardized Headset Identification System (SHIS): EC34/28.6 ∣ EC34/30
Spacers: 27 mm (2 x 10 mm 1 x 5 mm 1 x 2 mm)
Seat post
Brand: Thomson
Model: Elite
Seat clamp type: double bolt alloy
Seat cradle dimension: 41 mm x 41 mm
Seat collar diameter: 31.8 mm
Post material: alloy
Head material: alloy
Clamp material: alloy
Weight: 233 g (weighed by Frame and Wheel)
Offset: zero
Post diameter: 27.2 mm
Length: 33.0 cm
Finish: Black
Seat
Brand: Specialized
Model: Romin
Model year: 2010
Weight: 163 g (weighed by Frame and Wheel)
Covering: Synthetic Micromatrix
Length: 270 mm
Width: 143 mm
Rails: carbon oversized FACT
Length of rails: 70 mm
Rail width: 43 mm c-c
Rail diameter: 7 mm x 9 mm
Finish: black
Crank set
Brand: Shimano
Group: Ultegra
Model: FC-6700
Year: 2009 HI
Chain rings: 50T / 34T compact double
Chain compatibility: 9 / 10 speed
Bolt circle diameter: 130 mm
Crank arm length: 175 mm
Spider material: alloy
Finish: Duotone Silver
Rear derailleur
Brand: Shimano
Group: Ultegra
Model: RD-6700
Year: 2010
Cage type: Short
Drive train: 10-speed
Finish: Duotone Silver
Front derailleur
Brand: Shimano
Group: Ultegra
Model: FD-6700
Year: 2010
Type: Braze-on
Crank set: Double / Compact
Finish: Duotone Silver
Brakes
Brand: Shimano
Group: Ultegra
Model: BR-6700
Year: 2010
Pads: Shimano standard
Type: Dual pivot side pull caliper brake
Quick release: yes
Finish: Duotone Silver
Cassette
Brand: Shimano
Group: Ultegra
Model: CS-6700
Year: 2010
Gearing: 11, 12, 13, 14, 15, 17, 19, 21, 2 3, 25
Dual control brake levers
Brand: Shimano
Group: Ultegra
Model: ST-6700
Year: 2010
Speed (R): 10 speed
Speed (L): Double
Finish: Black
Bottom bracket
Brand: Shimano
Group: Ultegra
Model: SM-BB6700
Bearing type: sealed cartridge ceramic
Threading: English (1.37 x 24 threads per inch)
Shell length: 68 mm
Series: Road
Others
Drop outs: titanium vertical (R) titanium standard (F)
Rear derailleur hanger: replaceable
Front derailleur hanger: carbon band for braze-on
Cabling: external
Chain: Shimano Ultegra CN-6701
Pedals: not included
Bottle cages: not included
Front
Brand: Mavic
Model: Ksyrium Elite
Model year: 2010
Rim material: aluminum alloy Maxtal
Type: clincher
Serial number: CFO3301913
Size: 700c
ERTO: 622 x 15c
Front wheel weight with skewer, tire and tube: 2 pounds 7 ounces (1.1 kg)
Spoke count: 18
Spokes: Steel bladed black external nipples
Lacing: Radial
Hub: Mavic Ksyrium Elite
Hub material: aluminum alloy
Skewer: Mavic aluminum
Rim depth: 20 mm (22 mm at base of spoke)
Rim width: 20 mm (o-o)
Tire: Continental Grand Prix Four Seasons 700 x 23c
Over Lock Nut Dimension: 100 mm
Finish: Metallic lettering on black
Brand: Mavic
Model: Ksyrium Elite
Model year: 2010
Rim material: aluminum alloy Maxtal
Type: clincher
ETRTO: 622 x 15c
Size: 700c
Rear wheel weight with skewer, tire, tube and cassette: 3 pounds 2 ounces (1.2 kg)
Spoke count: 20
Spokes: steel bladed black external nipples
Lacing: drive-side: radial non drive-side: 2-cross
Hub: Mavic Ksyrium Elite
Hub material: aluminum alloy
Skewer: Mavic aluminum
Rim depth: 22 mm (25 mm at base of spoke)
Rim width: 20 mm (o-o)
Tire: Continental Grand Prix Four Seasons 700 x 23c
Over Lock Nut Dimension: 130 mm
Finish: Metallic lettering on black
Free hub body: Shimano
No comments:
Post a Comment