Sold: $741 Buyer: USA
2011 Cannondale SuperSix HiMod 58cm carbon frame set white road
Frame and Wheel is auctioning a Cannondale SuperSix frame set on the Frame and Wheel eBay Store. The frame set was purchased new as a complete bicycle (Cannondale SuperSix HiMod) at Cyclemania in Portland, Maine in early 2011. It was used for five months for racing and training during that season. The bicycle was never crashed. It was professionally maintained at Cyclemania. In early 2012, the components were switched out and the frame set was placed in storage. The frame set has had only one owner. The owner is selling the frame set because he has another bike. The owner is 6 feet tall with an inseam of 34 inches. The frame set features BB 30 bottom bracket, tapered head tube, oversized down tube, asymmetric chain stays, ovalised top tube, wish-bone seat stays, full carbon drop outs, full carbon front fork and pleasing black and white finish. The frame set as shown weighs 1.5 kg (3 pounds 4 ounces). The serial number on the bottom bracket reads XM90363 1USL058/WHT BI-0302. The serial number on the steer tube reads F206218 FD004-1Q. Please see 90 additional images of the frame set at Frame and Wheel’s Flickr page. Please see the Frame and Wheel website for more information about the service.
Review of condition
The frame set is in good condition. It is clean and ready for build. There are no bulges, discolorations, flexing or flaking that raise concerns about the structural integrity of the frame. There is no road wear on the underside of the down tube, on the back of the seat tube or inside the chain stays. The rear triangle is in alignment with the the centerline of the frame to within 0.5 mm (less than the width of a penny). The rear derailleur hanger is straight and undamaged. The cable stops are clear of obstructions. There is no corrosion in the water bottle bolt holes. The bottom bracket shell is not damaged. The crown race is securely fixed (integrated) to the front fork. The crown race is not pitted or corroded. There are no cracks, bulges, discoloration, flexing or flaking that raise concerns about the structural integrity of the front fork. The headset cartridge bearings turn smoothly and the headset is complete. The BB30 cartridge bearings turn smoothly. The BB30 circlips are not missing.
Frame and Wheel notes the following. There is a 40 mm x 20 mm abrasion on the drive side of the bottom bracket. There is a 20 mm x 20 mm and a 5 mm x 10 mm abrasion near it. There are a series of circular abrasions surrounding the bottom bracket. The abrasions are from a dropped chain. There are six 3 mm x 3 mm chips on the top of the drive side seat stay. There is a 5 mm x 10 mm abrasion on the inside of the drive side rear drop out. There is a 2 mm x 30 mm abrasion on the end of the drive side chain stay. There are cracks around the base of the cable stops on the head tube. The drive side chain stay shows chain wear. There is a mark on the seat tube from the clamp-on front derailleur hanger. There is wear around the drop outs. There is road wear under the crown of the head tube. There is a 10 mm x 10 mm chip on the steer tube. The headset cartridge bearings show wear.
Frame and Wheel conclusion
Frame and Wheel’s view is that this Cannondale SuperSix frame set will suit the taller cyclist who seeks a light and stiff frame set and who is not picky about cosmetics. The frame set has been raced and ridden and shows significant wear from a dropped chain, but it has only six months of use in its tubes and it has never been crashed. It has many more hours to go and should not be written off just yet. The frame set is one of Cannondale’s top end offerings and a blank canvas upon which the new owner can create his or her own masterpiece. Built up with SRAM Red components, Mavic Cosmic Carbone wheels and a Cannondale Hollowgram SI/SL crank set, the bicycle will be very light and will channel the cycling excellence of Liquigas cycling stars Ivan Basso and Ted King. A more modest and practical build will nevertheless result in a very nice and practical performance bicycle that will no doubt provide great satisfaction to its new owner. A great opportunity to obtain a very nice frame set at an excellent valuation.
Specifications:
Brand: Cannondale
Model: SuperSix HiMod
Size: 58 cm
Color: white / black
Frame material: high modulus carbon
Frame serial number: XM90363 1USL058/WHT BI-0302
Fork material: carbon
Fork model: Cannondale SuperSix
Design: traditional road
Wheel size: 700c
Frame and Wheel rating: Good condition
Frame and Wheel PAAS charge: $50.00
Following measurements are by Frame and Wheel
Total weight: 1.5 kg / 3 pounds 4 ounces (frame: 960 g fork: 380 g headset and bottom bracket bearings components: 150 g).
Center of BB to top of seat tube: 59 cm (c-t)
Effective top tube length: 57.5 cm (c-c)
Head tube length: 17.5 cm
Following measurements are by Cannondale
Frame size: 58 cm
Horizontal top tube length: 57.5 cm
Measured size: 56.0 cm
Seat tube angle: 73.0 degrees
Head tube angle: 73.5 degrees
Chain stay: 40.5 cm
Fork rake: 4.5 cm
Bottom bracket height: 27.0 cm
Wheelbase: 99.6 cm
Trail: 5.3 cm
Stand over: 82.2 cm
Bottom bracket drop: 6.7 cm
Front center distance: 60.1 cm
Head tube length: 17.5 cm
Stack: 57.9 cm
Reach: 39.9 cm
Front fork
Model: Cannondale SuperSix: white black finish, carbon drop outs, safety tabs.
Weight: 380 g
Front fork length: 37.5 cm
Steer tube serial number: F206218 FD004-1Q
Crown serial number: none
Steer tube material: carbon
Steer tube diameter: 1 1/8 inch to 1 1/2 inch
Steer tube length: 27.5 cm (base of crown race to top) cut
Crown race diameter: 38 mm (integrated crown race)
Drop outs: carbon
Brake type: recessed caliper
Rake: 4.5 cm
Other specifications
Seat post collar diameter: 34.8 mm
Bottom bracket: BB30 two bearings and two circlips included; no covers.
Cane Creek Standardized Headset Identification System (SHIS): IS41/28.6 IS52/40
Headset: FSA SuperSix System Integration seal cartridge bearings (upper) 30.2 x 41.8 (1 1/8 inch) (lower) 39.9 x 52.0 (1 1/2 inch)
Spacers: 1 x 15 mm 3 x 5 mm (30.0 mm)
Drop outs: rear: vertical carbon
Rear derailleur hanger: alloy replaceable
Front derailleur hanger: for clamp-on
Cabling: external
Rear fork spacing: 130 mm
Front fork spacing: 100 mm
No comments:
Post a Comment