Sold: $648 Buyer: USA
2010 BMC Pro Machine SLC01 59cm frame Easton EC90 fork black/red/orange road
Frame and Wheel is auctioning a 2010 BMC Pro Machine SLC01 frame set on the Frame and Wheel eBay Store. The frame set was purchased new from Competitive Cyclist in 2011. It was used for fair weather training and in one race in 2011. It has been in storage since the beginning of 2012. The frame set was never crashed. It was professionally maintained at Center Street Cycles in Brunswick, Maine. The owner is selling the frame set because he has another bike to ride. The frame set features Easton EC90 SLX front fork, FSA headset, unique t-shaped top tube, ovalized down tube, wishbone seat stays, internal cabling on the top tube and down tube, integrated seat clamp, carbon drop outs and distinctive “cut-out” between seat post and top tube. The owner of the frame set is 6’ 2” with an inseam of 35 inches. The frame set as shown weighs 3 pounds 9 ounces (1.6 kg). The serial number on the bottom bracket shell reads E0908PM2590608. The serial number on the steer tube reads 90F0122032. A seat post is on auction separately. Please see 95 additional images of the frame set at Frame and Wheel’s Flickr page. Please see the Frame and Wheel website for more information about the service.
Important information
There is a $50.00 Product Analysis and Service (PAAS) charge included in the shipping for this item. The PAAS charge covers or defrays the cost of packaging materials and compensates Frame and Wheel for the time and effort spent obtaining the item, inspecting and cleaning it, writing accurate and comprehensive descriptions about it, creating informative images of the item, processing the order in one day, offering a 14 day return policy and responding to emails quickly. For more information about the PAAS and other Frame and Wheel shipping and return policies, please see section at the end of the item description. Please visit the Frame and Wheel website for more information about the service and the company.
Review of condition
The frame set is in very good condition. It is clean and ready for build. There are no cracks, bulges or flexing that raise concerns about the structural integrity of the frame. There is no road wear on the underside of the down tube or on the back of the seat tube. The rear triangle is in alignment with the the centerline of the frame to within 0.5 mm (less than the width of a penny). The rear derailleur hanger is straight and undamaged. The cable stops are undamaged and clear of obstructions. There is no corrosion in the water bottle bolt holes or in the integrated seat clamp. The bottom bracket shell is not damaged. The threads in the bottom bracket are not stripped or corroded. There are no cracks, bulges, discoloration, flexing or flaking that raise concerns about the structural integrity of the front fork. The steer tube is not cracked or flaking. The crown race is mounted securely on the front fork. The crown race is not corroded or pitted. The cartridge bearings turn smoothly and the headset is complete.
Frame and Wheel notes the following. There is a 20 mm x 25 mm area of abrasion on the top inside of the non drive side seat stay from a wheel. There are markings on the seat tube from the front derailleur clamp. There are two 2 mm x 5 mm scratches on the drive side bottom bracket. There is a constellation of small spots around both ends of the bottom bracket. There is a constellation of small spots around the water bottle cage mounts on the seat tube and the down tube. There are two abrasions on the cable stop on the drive side of the down tube. There is flaking in the finish around the front derailleur cable opening at the base of the seat tube. There is flaking on the chain stay cable stop. There are four chips of 1 mm x 3 mm or less in size on the drive side chain stay near the chain stay guard. There is a 4 mm x 40 mm abrasion along the inside drive side fork from a wheel. There is road grit under the edges of the chain stay guard. There is wear on the front and rear drop outs.
Frame and Wheel conclusion
Frame and Wheel’s view is that this BMC Pro Machine SLC01 frame set will make an excellent choice for the taller rider who seeks something very light and stiff. The frame set is in very good condition and it is a blank canvas on which the new owner can create a very light racing bike. Alternatively, the new owner can build up the frame set with SRAM Red and Easton carbon wheels to recreate the bicycle that Cadel Evans used to win the Tour de France in 2011. Either way, the frame set has been gently used and still has many more hours of racing and training in its distinctive carbon tubes. An excellent and rare opportunity to obtain a very nice frame set.
Specifications:
Brand: BMC
Model: Pro Machine SLC01
Size: 59 cm
Model year: 2010
Color: black / red / orange
Frame material: carbon (iSC CNT nanosolve molecules)
Frame serial number: E0908PM2590608
Fork material: carbon
Fork model: Easton EC90 SLX
Design: traditional road
Wheel size: 700c
Frame and Wheel rating: Very good condition
Frame and Wheel PAAS charge: $50.00
Following measurements are by Frame and Wheel
Total weight: 1.6 kg / 3 pounds 9 ounces (frame: 1,200 g fork: 300 g headset bearings and components: 100 g).
Center of BB to top of seat tube: 60 cm (c-t)
Effective top tube length: 58 cm (c-c)
Head tube length: 20.4 cm
Following measurements are by BMC
Frame size: 59 cm
Horizontal top tube length: 58.5 cm
Seat tube length: 59.7 cm
Seat tube angle: 73.0 degrees
Head tube angle: 73.0 degrees
Chain stay: 40.7 cm
Bottom bracket drop: 6.9 cm
Head tube length: 20.4 cm
Front fork
Model: Easton EC90 SLX full carbon drop outs, safety tabs
Weight: 330 g
Front fork length: 37.5 cm
Steer tube serial number: 90F0122032
Crown serial number: none
Steer tube material: carbon
Steer tube diameter: 1 1/8 inch
Steer tube length: 26 cm (base of crown race to top) cut
Crown race diameter: 30 mm
Drop outs: carbon
Brake type: recessed caliper
Rake: 4.3 cm
Other specifications
Seat post collar diameter: na
Seat post diameter: 31.6 mm
Bottom bracket: English thread 1.37 x 24
Cane Creek Standardized Headset Identification System (SHIS): IS42/28.6 IS42/30.0
Headset: FSA seal cartridge bearings (upper) 41.8 x 30.2 x 45 x 45 (1 1/8 inch) (lower) 41.8 x 30.2 x 45 x 45 (1 1/8 inch) top cap, top cover and compression ring
Spacers: 1 x 5 mm
Drop outs: rear: vertical carbon
Rear derailleur hanger: alloy replaceable
Front derailleur hanger: for clamp-on
Cabling: internal top tube and down tube, external on chain stay
Rear fork spacing: 130 mm
Front fork spacing: 100 mm
No comments:
Post a Comment