Sold: $740 Buyer: Germany
2013 Raleigh RXC Pro Disc 59cm carbon cyclocross frame Enve fork PF30 BB
Frame and Wheel is auctioning a 2013 Raleigh RXC Pro Disc cyclocross frame set on the Frame and Wheel eBay Store. The frame set was purchased new in late 2012. It was used for road riding. It was never raced. It was never crashed. It has had only one owner. The owner is selling it because he could not get it to fit properly. The frame set features Enve carbon front fork, Press Fit 30 bottom bracket, full carbon construction, cyclocross geometry, variable fittings for mechanical, hydraulic and electronic shifting compatibility, disc brake mounts, down tube and chain stay internal cabling, tapered head tube (1 1/8 inch to 1 1/2 inch steer tube), flat oval top tube, oversized down tube, oversized chain stays, oversized flat oval wishbone seat stays, nude carbon finish and legendary English cycling name. The frame set as shown weighs 4 pounds 7 ounces (2.0 kg). The serial number on the bottom bracket reads U126C00024. The serial number on the steer tube reads 15 12 45150151. The frame set is set up for electronic shifting. There are 100 images of the frame set on Frame and Wheel’s Flickr page. Please take a look.
Review of condition
The frame set scores a 97 percent on the Frame and Wheel Rating System. It is in very good condition. It is clean and ready for build. There is no road wear on the bottom of the down tube, the back of the seat tube or inside the chain stays. There are no cracks, bulges, discolorations, flexing or flaking that raise concerns about the structural integrity of the frame. The rear triangle is in alignment with the the centerline of the frame to within 3.0 mm (the width of two pennies). The rear derailleur hanger is straight and undamaged. The down tube tube cable openings are undamaged, securely attached and clear of obstructions. The seat stay cable openings are undamaged, securely attached and free of obstructions. The disc brake mount on the non drive side chain stay is undamaged. There is no corrosion on the disc brake bolts. There is no corrosion in the water bottle bolt holes. The bottom bracket shell is not damaged. The bottom bracket bearings turn smoothly. There are no cracks, bulges, discoloration, flexing or flaking that raise concerns about the structural integrity of the front fork. The crown race is not damaged. The disc brake mount on the drive side fork blade is undamaged. The cartridge bearings are not corroded. The cartridge bearings turn smoothly. The head set is complete. Frame and Wheel notes the following. The rear drop outs show wear. The front drop outs show wear. The bearing race for the 1 1 / 8 inch cartridge bearing does not stay in place. The chain stay protector shows wear.
Frame and Wheel conclusion
Frame and Wheel’s view is that this Raleigh RCX Pro Disc cyclocross frame set will make an excellent choice for the cyclocross competitor who seeks a full carbon high performance frame set for high level and competition. It is in very good condition and shows immaterial signs of wear. Built up with Shimano Ultegra electronic shifting, Carver 38 carbon tubulars, TRP Spyre disc brakes and Ritchey handle bars, the frame set will become a high performance “A” bike with a distinctive and classic voice. The new owner will relish the performance and light weight of the built up bike and appreciate the effectiveness of the disc brakes. An excellent opportunity to obtain one of the finest frame sets available from Raleigh.
Specifications:
Brand: Raleigh
Model: RXC Pro
Model year: 2013
Size: 59 cm Large
Color: silver lettering on nude carbon
Frame material: carbon
Frame serial number: U126C00024
Fork material: carbon
Fork model: Enve
Design: zero slope top tube
Brake type: disc
Series: cyclocross
Wheel size: 700c
Frame and Wheel rating system score: 97 percent / very good condition
Following measurements are by Frame and Wheel
Total weight: 2.0 kg / 4 pounds 7 ounce (frame: 1,350 g fork: 480 g headset components and fixtures: 200 g).
Center of BB to top edge of seat tube: 57.5 cm (c-t)
Effective top tube length: 59.0 cm (c-c)
Head tube length: 17.0 cm
Following measurements are by Raleigh
Frame size: 59
Seat tube (c-c): 57.0 cm
Stand over height: 84.0 cm
Top tub length: 59.0 cm (measured horizontally)
Head tube length: 17.0 cm
Head tube angle: 72.0 degrees
Seat tube angle: 73.0 degrees
Chain stay length: 42.5 cm
Fork offset: 45.0 cm
BB drop: 5.5.cm cm
Front fork
Brand: Enve
Model: Carbon Monocoque Disc cross 1 1/8 inch to 1 1/2 inch taper
Weight: 480 g
Front fork length: 40.0 cm
Steer tube serial number: 15 12 45150151
Crown serial number: none
Crown material: carbon
Steer tube material: carbon
Steer tube diameter: 1 1/8 inch (28.6 mm) to 1 1/2 inch (40.0 mm)
Steer tube length: 24.5 cm (base of crown race to top) cut
Crown race diameter: 40 mm
Drop outs: alloy with safety tabs
Brake type: disc
Other specifications
Seat post collar diameter: 34.9 mm
Seat post diameter: 31.6 mm
Bottom bracket: Press Fit 30 with 24 mm adapters
Cane Creek Standardized Headset Identification System (SHIS): IS42/28.6 IS52/40.0
Headset: sealed cartridge bearings Enve carbon top cap, FSA bearing cover
Spacers: 5 x 5 mm alloy
Drop outs: rear: vertical alloy front: standard carbon
Rear derailleur hanger: alloy replaceable
Front derailleur hanger: clamp-on 34.9 mm diameter
Cabling: internal top tube and seat stay
Rear fork spacing: 135 mm
Front fork spacing: 100 mm
No comments:
Post a Comment