2014 Pinarello Dogma 65.1 Think 2 59.5cm carbon frameset Italian BB EPS white black road
Comments
Purchased new in 2014. Used for enthusiastic riding. Seller is the original owner. Seller is 6 feet 2 inches. Inseam 34 inches. Never crashed. Very low miles. The frame set as shown weighs 4 pounds 3 ounces (1.9 kg). The frame serial number reads 3AA5950940082. EPS electronic shifting compatible. Italian thread bottom bracket.
Review of condition
5 mm x 5 mm painted over chip in the finish on lower end of non drive side down tube. 5 mm x 15 mm light abrasion on outside surface of non drive side chain stay near the drop out. Wear around front and rear drop outs. Wear around brake caliper mounts. Abrasions on seat post from seat bag and installation and removal. Ships in custom box. Please see 100 images of the frameset on the Frame and Wheel Flickr Page.
Specifications:
Brand: Pinarello
Model: Dogma 65.1 Think 2
Model year: 2014
Size: 59.5 cm
Color: white black
Frame material: carbon
Frame serial number: 3AA5950940082
Fork material: carbon
Fork model: Pinarello Onda
Series: road
Wheel size: 700c
Frame and Wheel rating: Very good condition
Following measurements are by Frame and Wheel
Total weight: 1.9 kg / 4 pounds 3 ounces (frame: 1,230 fork: 420 g seat post: 230 g fittings: 85 g)
Effective top tube: 58.0 cm (c-c)
Center of BB to top of seat tube: 61.0 cm (c-t)
Center of BB to top of seat with seat post at minimum insert: 91.0 cm
Head tube length: 21.5 cm
Seat post length: 9.0 cm (bottom of seat post to minimum insert)
Seat post length: 34.0 cm (bottom of seat post to center rails)
Seat post length: 39.0 cm (bottom of seat post to top of seat)
Following measurements are by Pinarello
Size: 59.5 cm
Seat tube: 61.0 cm (c-t)
Top tube: 58.7 cm
Stack: 61.2 cm
Reach: 39.4 cm
Set back: 18.0 cm
Head tube length: 21.5 cm
Head tube angle: 73.4 degrees
Seat tube angle: 72.4 degrees
Chain stay length: 40.8 cm
BB drop: 6.7 cm
Front fork
Brand: Pinarello
Model: Onda
Weight: 420 g
Serial number: na
Crown material: carbon
Steer tube material: carbon
Steer tube diameter: 1 1/8 inch (28.0 mm) to 1 1/2 inch
Steer tube length: 26.0 cm (base of crown race to top) previously cut
Crown race diameter: 40 mm
Drop outs: alloy with safety tabs
Brake type: caliper
Seat post:
Brand: Pinarello
Seat clamp type: double bolt
Seat clamp material: aluminum
Head material: carbon
Weight: 230 g
Offset: 20 mm
Seat post diameter: aero
Other specifications
Bottom bracket: Italian thread 36 x 24TPI
Cane Creek Standardized Headset Identification System (SHIS): IS42/28.6 IS52/40
Spacers:1 x 10 mm
Drop outs: rear: standard front: standard
Rear derailleur hanger: replaceable
Front derailleur hanger: rivet mounted alloy for braze-on
Cabling: internal top tube, down tube and chain stay
Rear fork spacing: 130 mm
Front fork spacing: 100 mm
No comments:
Post a Comment