Review of condition
Light wear on bottom of down tube from battery mount zip tie. Wear on non drive side chain stay from sensor mount zip ties. Wear on chain stay protector. 35 mm x 18 mm imperfection in the finish on the outside surface of the drive side chain stay. Wear on rear drop outs. Wear around brake mounts. The down tube wire grommet is missing. Ships in custom frame set box. Please see 70 images of the frameset on the Frame and Wheel Flickr Page. Good condition.
Specifications:
Brand: Specialized
Model: S-Works Venge Project Black
Model year: 2012
Size: 56 cm
Color: black
Frame material: carbon
Frame serial number: STAN411B0600 WSBC6004070056G
Fork material: carbon
Fork model: Specialized
Design: sloping top tube
Series: aero road
Wheel size: 700c
Frame and Wheel rating: Good condition
Following measurements are by Frame and Wheel
Total weight: 1.8 kg / 4 pounds 1 ounce (frame: 1,060 fork: 340 g seat post: 180 g headset bottom bracket adapter and fittings: 225 g).
Effective top tube: 57.5 cm (c-c)
Center of BB to top of seat tube: 53.0 cm (c-t)
Center of BB to top of seat with seat post at minimum insert: 83.0 cm
Center of BB to top of seat with seat post at full insert: 70.0 cm
Head tube length: 16.0 cm
Stand over: 81.0 cm
Seat post length: 9.0 cm (bottom of seat post to minimum insert)
Seat post length: 27.0 cm (minimum insert to center rails)
Seat post length: 36.0 cm (bottom of seat post to center rails)
Seat post length: 40.0 cm (bottom of seat post to top of seat)
Following measurements are by Specialized
Seat tube length (BB center to top): 52.7 cm
Top tube length horizontal: 56.5 cm
BB drop: 6.9 cm
Chain stay length: 40.5 cm
Seat tube angle: 73.25 degrees
Head tube angle: 73.5 degrees
Fork rake: 4.3 cm
Trail: 5.6 cm
Front center: 59.0 cm
Wheel base: 98.6 cm
Standover height: 80.9 cm
Head tube length: 16.0 cm
Reach: 39.5 cm
Stack: 56.6 cm
Front fork
Brand: Specialized
Model: Specialized
Weight: 340 g
Serial number: K3811E0411
Crown material: carbon
Steer tube material: carbon
Steer tube diameter: 1 1/8 inch (28.0 mm) to 1 3/8 inch
Steer tube length: 22.5 cm (base of crown race to top) previously cut
Crown race diameter: 30 mm
Drop outs: carbon with safety tabs
Brake type: caliper
Rake: 4.3 cm
Seat post:
Brand: Specialized
Seat clamp type: single bolt
Seat clamp material: aluminum
Head material: aluminum
Seat clamp bed dimensions: 42 mm x 32 mm
Weight: 180 g
Offset: 20 mm
Seat post diameter: aero
Seat post length: 9.0 cm (bottom of seat post to minimum insert)
Seat post length: 27.0 cm (minimum insert to center rails)
Seat post length: 36.0 cm (bottom of seat post to center rails)
Seat post length: 40.0 cm (bottom of seat post to top of seat)
Other specifications
Bottom bracket: Press Fit 30
Cane Creek Standardized Headset Identification System (SHIS): IS42/28.6 IS49/37.0
Headset: OEM S-Works aero top cap
Spacers: none
Drop outs: rear: vertical front: standard
Rear derailleur hanger: replaceable
Front derailleur hanger: rivet mounted alloy for braze-on
Cabling: internal top tube, down tube and chain stay
Rear fork spacing: 130 mm
Front fork spacing: 100 mm
No comments:
Post a Comment