SRAM S500 alloy crank set 39T/53T 170mm double 10-speed GXP cupset

Sold: $49

SRAM S500 alloy crank set 39T/53T 170mm double 10-speed GXP cupset

Frame and Wheel is auctioning a SRAM S500 crank set with a GXP cup set on the Frame and Wheel eBay Store. The cranks were original equipment on a new bike purchased in 2010. The cranks were switched out for compact cranks in August 2010 and have an estimated 1,500 miles of use. They have been in storage ever since. The cranks feature integrated bottom bracket, road gearing and black finish. The cup set is new and has never been installed. The cranks are in good condition. They are clean and normal wear. The chain rings are not bent and the teeth are not chipped or broken. There is no wear on the outside of the crank arms. All the chain ring bolts are included and they are not stripped. The bolt holes for the pedals are not stripped. There is no wear on the spindle and the splines are not stripped or damaged. Frame and Wheel notes the following:  The chain ring teeth show some wear. The inside of the big chain ring shows some wear. There is corrosion on the non-drive side crank arm bolt. A very lightly used crank set with plenty of hours of use remaining. Original SRAM packaging.

Specifications

Brand: SRAM

Model: S500  

Crank arm and spider material: AL-7050 TV

Spline Interface: 10 splines

Chain rings: 53T / 39T AL-7050 T-6

Crank arm length: 170 mm

Bolt circle diameter: 130 mm

Spindle length: 125 mm + / - integrated (end to end of axle measured by Frame and Wheel)

Spindle diameter: 22 mm

Cup set: GXP 68 mm

Cup set weight: 120 g

Threading: English

Crank set including cup set: 920 g

Finish: Black

Frame and Wheel rating: Good condition