4ZA Python carbon front fork cyclocross

Sold: $147.50

4ZA Python carbon front fork cyclocross

Frame and Wheel is auctioning a 4ZA Python carbon cyclocross front fork on the Frame and Wheel eBay store. The fork is used and was originally mounted on a Ridley Crosswinds cyclocross bicycle. The fork has been in storage for the past few years. The owner is selling it because he does not use it and he is clearing out unused cycling equipment from his basement. The fork features carbon steer tube and fork blades, alloy drop outs and three position brake mounts. The serial number on the tube reads 1943740 85. No tabs. Crown race is installed. Expander bolt included. The fork is being sold as is.

Review of condition

The fork is in good condition. There are no cracks, chips or flaking in the finish of the fork blades. There are no cracks, notches or color changes in the steer tube. The brake pivots are straight and securely mounted. There is no wear under crown. The crown race is smooth and horizontally and firmly installed. There is no corrosion on the drop outs, the crown race or the brake pivots. Frame and Wheel notes the following: the drop outs show wear. The steer tube has been cut. Frame and Wheel carefully inspected this item, but cannot guarantee that every imperfection has been spotted.

Frame and Wheel conclusion

Frame and Wheel’s view is that this is very light cyclocross front fork that still has many hours of racing and riding left in it. The fork will make an excellent upgrade to an existing bike or could function as a spare front fork for the A or B bike. A great opportunity to obtain a light fork ant a light price.

Specifications

Year: 2007/2008 estimated

Color: black

Material: carbon

Serial number on steer tube: 1943740 85

Drop outs: alloy

Rake: 45 mm

Weight: 410 g (measured by Frame and Wheel)

Fork height: 395 mm (measured by Frame and Wheel from bottom of lower bearing race to center of front axle).

Steer tube width: 1 1/8 inches threadless no taper

Crown race: installed 30 mm diameter

Steer tube length: cut 245 mm or 9.5 inches from the race to the top of the steer tube

Steer tube material: carbon

Wheel size: 700c

Brake type: center pull

Front hub spacing: 100 mm

Shipping details

The item will be shipped using USPS Parcel Post in the United States unless you choose the faster service. The item is shipped internationally using USPS First Class International unless you choose the faster service. Please check the drop down menu in the shipping tab for rates. Please pay promptly and by Pay Pal. Thank you.

More information about Frame and Wheel can be found at Frame and Wheel - Home

Find the page on Facebook at Frame and Wheel

Follow us on Twitter @frameandwheel

Ride with Frame and Wheel on Strava Cycling