Sold: $13.00
2011 Deda Elementi Zero100 Alloy Handlebars 42cm (c-c) white
Frame and Wheel is bringing to market on the Frame and Wheel eBay store a 2011 Deda Elementi Zero100 alloy handlebar set. The previous owner purchased the handlebars new earlier this year and mounted them on a performance road racing bike. However, the build was never completed and thus the handle bars have never been ridden. The owner is selling the handlebars because he no longer rides frequently and he is clearing out his inventory of cycling accessories and components. The handlebars feature the Rapid Hand Movement (RHM) concept (which Frame and Wheel understands to be a design that results in a shallower drop and shorter reach than traditional round bars); compatibility with clip-on aero bar extensions, ergonomic handlebar top, rough surfacing at the top of the drops to reduce slippage of the brake mounts, grooves on the bottom of the handlebar top for running cables under the bar tape and the distinctive white finish. They are compatible with 31.8 mm clamps. The serial number on the end of the left bar end reads 8048Z. Please note that a 2011 Deda Zero100 Servizio Corse stem (120 mm) is being simultaneously but separately auctioned on the Frame and Wheel eBay store. This stem was mounted on this handlebar set. There are 29 images of the handlebars at Frame and Wheel eBay Selling Services and on Facebook at Frame and Wheel. Please take a look. The handlebars are being sold as is.
Review of condition
The handlebars are in good condition. They are clean and there are no bends or dents in the handlebar top or the drops. Frame and Wheel notes the following. There are impressions in the paint on the handlebar top remaining from the handle bar clamp. There is a 3 x 4 mm chip in the paint on the center of the handlebar top. There is a 3 x 2 mm bulge in the finish on the center of the handlebar top. There is a 3 x 5 mm and a 2 x 2 mm chip in the paint on the underside center of the handlebar top. There is a 1 x 10 mm blemish on the underside of the right handlebar top. There is a 2 x 3 mm chip at the base of the right outward facing side handlebar drop. There are marks at the top of the drops from brake mounts. There are small chips in the paint around the bar ends. Frame and Wheel carefully inspected these handlebars, but cannot guarantee that every imperfection has been spotted.
Frame and Wheel conclusion
These handlebars will suit the rider who prefers the traditional round bend and seeks shallow drops. They are not as light as carbon handlebars, but their alloy construction means that they are strong and durable. The white finish adds a distinctive Italian flair and they will go well with a Deda Zero 100 Servizio Corsa stem. This is an excellent opportunity to obtain a very nice and unridden set of handle bars at an excellent valuation.
Specifications
Brand: Deda Elementi
Model: Zero100
Finish: White
Design: traditional bar and stem
Year: 2011
Material: Aluminum alloy 7075 T6 triple butted
Bend: Rapid Hand Movement / traditional round
Weight: 270 g
Width: 42 cm (c-c) 44 cm (o-o)
Drop: 130 mm measured by Frame and Wheel (128 mm stated by Deda)
Reach: 75 mm measured by Frame and Wheel (75 mm stated by Deda)
Shipping details
The handlebars will be shipped using United States Postal Service Parcel Post in the United States unless you choose a faster service. The handlebars are shipped internationally using United States Parcel Post Priority Mail. Frame and Wheel will combine shipping for the stem and the handlebars. Please check the drop down menu in the shipping tab for rates. Please pay promptly and by Pay Pal. Thank you.
More information about Frame and Wheel can be found at www.theframeandwheel.com
Find the page on Facebook at Frame and Wheel
No comments:
Post a Comment