Sold: $2,011 Buyer: USA
2011 BMC Teammachine SLR01 50cm SRAM Force Easton EA70 Mavic Ksyrium ES Selle Italia BB30 road
Frame and Wheel is auctioning a BMC Teammachine SLR01 on the Frame and Wheel eBay Store. The bicycle was purchased second hand in early 2012. It was unused at the time of purchase. The current owner used it for training. It has about 1,000 miles of use. The bike was never raced. It was never crashed. It has spent much of the past year in storage. The frame set features full carbon construction, BMC Tuned Compliance Concept (TCC) front fork, proprietary BMC quill-style seat post, oversized down tube, oversized chain stays, distinctive “stepped” seat stays, BB30 bottom bracket, tapered top tube, tapered head tube (1 1/8 inch to 1 1/4 inch headset), gloss black and red finish and Swiss design provenance. The bicycle features SRAM Force front and rear derailleurs, SRAM Force cranks set (53T/39T chain rings and 170 mm crank arms), SRAM PG-1070 cassette (12-25), SRAM Force brake set, SRAM Force dual control shifters, Easton EA70 alloy handle bars (42 mm c-c), Easton EA 70 alloy stem (110 mm), Selle Italia SL seat and Mavic Ksyrium ES (Edition Speciale Dixieme Anniversaire Helium) wheels with Continental Ultra Sport tires. The bicycle as shown weighs 14 pounds 13 ounces (6.7 kg). The serial number on the bottom of the bottom bracket reads Y1010SLR 5000269. The serial number on the front fork crown reads YTBCK 104857. The owner is 5 feet 8 inches with an inseam of about 30 inches. Stand over is 76.0 cm. One bottle cage included. Mavic titanium skewers. Pedals not included. There are 160 detailed images of the bicycle at Frame and Wheel’s Flickr page. Please take a look.
Review of condition
The bicycle is in very good condition. It is clean and ready to ride. The shifting is complete in all twenty gears. The brakes activate easily and grip well. There is 5 mm of brake pad. The brake cable housing is not cracked. The hubs spin freely. The spokes are tight and straight. The rims are round. The wheels show no horizontal or vertical variation when placed in the truing stand. There are no dents in the alloy rims. There are no cracks in the hub bodies. There are no cracks in the flanges of the hubs. There is no corrosion on the hubs, the spokes or the skewers. The skewers are straight and complete. The tires hold pressure. There is no road wear on the bottom of the down tube or on the back of the seat tube. There is no wear on the head tube or seat tube from cable housing rub. There is no cracking, discoloration, bulging, flexing or flaking that raise concerns about the structural integrity of the frame. The rear triangle is in alignment with the centerline of the frame to within 1.5 mm (the width of one penny). The rear derailleur hanger is straight and undamaged. The front derailleur hanger is undamaged and secured firmly. There is no cracking, bulging or flexing that raise concerns about the structural integrity of the front fork. The steer tube does not show any cracks or bulges. The crown race is secured firmly. There is no play in the bottom bracket. The water bottle cage bolts are not stripped or corroded. The handlebar is not bent. The bar tape is mounted securely. There are no rips or abrasions on the seat. The chain does not read 0.75 or 1.0 on the chain wear tool. Frame and Wheel notes the following. The rear hub spins roughly and will benefit from some expert servicing. The rear tire is worn. The braking surfaces of the wheels show wear. The sides of the seat show wrinkles. There is wear on handlebar center from the stem. There is wear on the seat post from installation and removal.
Frame and Wheel conclusion
Frame and Wheel’s view is that this BMC Teammachine SLR01 will make an excellent choice for the emerging and dedicated road cyclist who wants to upgrade from that second hand aluminum bicycle to a fast, stiff and very light road bike. The bicycle is in very good condition and shows immaterial signs of wear. The new owner will appreciate the smooth double click shifting of the SRAM Force drive train, the light weight and durability of the Mavic Ksyrium ES wheels and the voice of the bike that channels the spirit of Cadel Evans, Tejay van Garderen and George Hincapie. A rare and fine opportunity to obtain a very nice and very lightly used BMC Teammachine SLR01.
Specifications:
Brand: BMC
Model: Team Machine SLR01
Model year: 2011
Size: 50
Color: Gloss black with white lettering red highlights
Frame material: carbon
Frame design: road
Frame serial number: Y1010SLR 5000269
Fork design: standard
Fork material: carbon
Fork model: BMC
Fork serial number: YTBCK 104857
Wheel size: 700c
Frame and Wheel rating: Very good condition
Following measurements are by Frame and Wheel
Total weight with wheels: 14 pounds 13 ounce (6.7 kg)
Total weight without wheels: 9 pounds 5 ounce (4.2 kg)
Front wheel weight with skewer, tire and tube: 2 pounds 3 ounces (1.0 kg)
Rear wheel weight with skewer, tire, tube and cassette: 3 pounds 2 ounces (1.4 kg)
Center of BB to top of seat tube: 50.5 cm
Effective top tube: 52.5 cm (c-c)
Seat post length: 32.0 cm mm (bottom end of seat post to center rails)
Seat post length: 37.0 cm (bottom end of seat post to top of seat)
Stand over height from middle of top tube: 76.0 cm
Wheelbase: 97.5 cm
Following measurements are by BMC
Size: 50
Seat tube: 52.0 cm
Top tube: 53.5 cm
Head tube length: 13.3 cm
Stack: 53.0 cm
Reach: 37.8 cm
Head tube angle: 72.0 degrees
Seat tube angle: 73.5 degrees
Chain stay length: 40.2 cm
Bottom bracket drop: 6.9 cm
Front fork
Brand: BMC
Model: TeamMachine SLR01 TCC
Weight: 338 g (weighed by Frame and Wheel)
Length: 37.5 cm
Serial number: YTBCK 104857
Steer tube material: carbon
Steer tube diameter: 1 1/8 inch to 1 1/4 inch
Steer tube length: 21.5 cm (base of crown race to top)
Crown race diameter: 33.0 mm
Crown material: carbon
Drop outs: carbon
Safety tabs: yes
Brake type: caliper
Handlebar
Brand: Easton
Model: EA 70
Material: aluminum alloy
Type: compact / ergonomic
Width (c-c): 42.0 cm
Bar clamp diameter: 31.8 mm
Drop: 130 mm
Reach: 75 mm
Bar tape: Zipp Service Course Black
Headset
Brand: FSA
Steer tube diameter: 1 1/8 inch (28.6.0 mm) to 1 1/4 inch (33.0 mm)
Type: Integrated
Cane Creek Standardized Headset Identification System (SHIS): IS41/28.6 IS47/33.0 (1 1/8 inch upper to 1 1/4 inch lower)
Headset: sealed cartridge bearings FSA carbon top cap, FSA bearing cover
Spacers: 3 x 10 mm 1 x 5 mm carbon
Stem
Brand: Easton
Model:EA 70
Weight: 168 g (Measured by Frame and Wheel)
Material: aluminum alloy
Length: 11.0 cm
Rise: + / - 6 degrees
Steer tube diameter: 1 1/8 inch
Bar clamp diameter: 31.8 mm
Collar stack height: 40.0 mm
Face plate: alloy four bolts
Seat post
Brand: Easton
Model: BMC Tuned Compliance Concept (TCC)
Seat clamp type: double bolt
Seat clamp material: alloy
Head material: carbon
Seat clamp bed dimensions: 45 mm x 39 mm
Weight: 233 g
Offset: zero
Seat post diameter: Easton proprietary
Seat post length: 11.0 cm (bottom end of seat post to minimum insert)
Seat post length: 21.0 cm mm (minimum insert to center rails)
Seat post length: 32.0 cm mm (bottom end of seat post to center rails)
Seat post length: 37.0 cm (bottom end of seat post to top of seat)
Finish: carbon
Seat
Brand: Selle Italia
Model: SL
Model year: 2011
Weight: 214 g (weighed by Frame and Wheel)
Covering: Synthetic
Length: 280 mm
Width: 135 mm
Rails: steel alloy (maganese)
Adjustable rail length: 40 mm
Rail width: 44 mm c-c
Rail diameter: 7 mm x 7 mm
Finish: black
Crank set
Brand: SRAM
Model: Force
Model year: 2011
Chain rings: 53T / 39T double
Bolt circle diameter: 130 mm
Crank arm length: 170 mm
Spider material: carbon
Finish: black
Rear derailleur
Brand: SRAM
Group: Force
Year: 2011
Cage type: Short
Drive train: 10-speed
Finish: chrome
Front derailleur
Brand: SRAM
Group: Force
Year: 2011
Type: Braze-on
Crank set: double
Finish: Chrome
Brakes
Brand: SRAM
Group: Force
Year: 2011
Pads: SRAM by Swisstop for alloy rims
Type: side pull caliper brake
Quick release: yes
Finish: chrome gray
Dual shift levers
Brand: SRAM
Group: Force
Model year: 2011
Hoods: black
Cassette
Brand: SRAM
Model: PG-1070
Year: 2010
Gearing: 12, 13, 14, 15, 16, 17, 19, 21, 23, 25
Bottom bracket
Threading: BB30
Others
Seat collar diameter: proprietary
Drop outs: carbon standard (R) carbon standard (F)
Rear derailleur hanger: replaceable
Front derailleur hanger: riveted for braze-on
Cabling: external top tube, down tube and chain stay
Chain: SRAM PC-1031
Pedals: not included
Bottle cage (s): Bontrager
Front
Brand: Mavic
Model: Ksyrium ES (Edition Speciale Dixieme Anniversaire Helium)
Model year: 2006
Rim material: aluminum S6000
Rim shell material: aluminum S6000
Series: road
Type: clincher
ETRTO: 622 x 13c
Rim serial number: na
Hub serial number: na
Size: 700c
Front wheel weight with skewer, tire and tube: 2 pounds 3 ounces (1.0 kg)
Spoke count: 18
Spokes: aluminum aero external nipples
Lacing: radial
Hub: Mavic Ksyrium ES
Hub material: carbon shell
Skewer: Mavic titanium
Rim depth: 22.0 mm (at base of spoke measured by Frame and Wheel)
Rim width: 19.0 mm (measured by Frame and Wheel)
Tire: Continental Ultra Sport 700 x 23C
Base tape: na
Over Lock Nut Dimension: 100 mm
Finish: commemorative yellow lettering on red panel
Rear
Brand: Mavic
Model: Ksyrium ES (Edition Speciale Dixieme Anniversaire Helium)
Model year: 2006
Rim material: aluminum S6000
Rim shell material: aluminum S6000
Type: clincher
ETRTO: 622 x 13C
Series: road
Rim serial number: na
Hub serial number: na
Size: 700c
Rear wheel weight with skewer, tire, tube and cassette: 3 pounds 2 ounces (1.4 kg)
Spoke count: 20
Spokes: aluminum aero external nipples
Lacing: 2-cross non drive-side radial drive side
Hub: Mavic Ksyrium ES
Hub material: aluminum
Skewer: Mavic titanium
Rim depth: 25.0 mm (at base of spoke measured by Frame and Wheel)
Rim width: 19.0 mm (measured by Frame and Wheel)
Tire: Continental Ultra Sport 700 x 23C
Base tape: na
Over Lock Nut Dimension: 130 mm
Free hub body: Shimano / SRAM
Finish: commemorative yellow lettering on red panel
