Sold: $1,078 Buyer: Saudi Arabia
2009 Cervelo S2 51cm carbon frameset 3T Funda Pro fork black red
Frame and Wheel is auctioning a 2009 Cervelo S2 51 cm frame set on the Frame and Wheel eBay Store. The frame set was purchased new in February of 2010 at Fit Werx 2 in Peabody, Massachusetts and used in masters category and category two races for two seasons (2010 and 2011) in New England. It has about 600 hours of all weather racing and training. It has never been crashed and it has had only one owner. It has always been stored indoors and it has been professionally maintained at Freeman’s Bicycle Service and Cyclemania in Portland, Maine. The frame set has been in storage since September 2011. Frame and Wheel is the original owner of this frame set and is selling it because he has upgraded to an Austro-Daimler Superleicht Carbon Di2. The Cervelo S2 frame set features the original 3T Funda Pro red front fork, original Cervelo aero seat post, top tube and down tube internal cabling, replaceable rear derailleur hanger, braze-on front derailleur hanger, aero down tube and seat tube, compact geometry and classic Cervelo black / red finish. The serial number on the underside of the bottom bracket shell reads SNS2C08L00211. The serial number on the bottom of the front fork crown reads CF143208M0030. The serial number inside the bottom bracket reads CVR01T35108100052C. The frame set as shown weighs 1.67 kg (3 pounds 11 ounces). Frame and Wheel is 5 feet 10 inches with an in seam of 83 cm. There are over 100 images of the frame set at Frame and Wheel Auction Services Please take a look.
Review of condition
The frame set is in good condition. It is clean and ready for build. There are no cracks or bulges that raise concerns about the structural integrity of the frame or the fork. The rear drop outs are in alignment with the the centerline of the frame and the rear derailleur hanger is straight and undamaged. The front derailleur hanger is riveted securely to the seat tube and is undamaged. The internal cable stops in the down tube are complete and working properly. The chain stay cable stop is riveted securely and undamaged. The threads of the bottom bracket are not stripped. The headset cartridge bearings move smoothly and quietly. The headset races are not pitted or corroded. The steer tube is not cracked or flaking. The front fork has safety tabs. The race is mounted securely on the front fork and the headset is complete. The seat post is not cracked or flaking. The seat post clamp is complete. There is no corrosion in the bottom bracket, the water bottle bolts, the seat clamp, the derailleur hangers or the head set races.
Frame and wheel notes the following. There is a 5 x 5 mm chip in the “C” in Cervelo on the non-drive side side of the head tube. There are two 3 x 3 mm chips near it. There are four chips of about 1 mm x 3 mm in size along the bottom edge of the head tube. The damage was incurred by the front brake arm rubbing against the head tube when the bike was being transported in a travel case. There is a 5 x 5 mm chip in finish of the non-drive side blade of the front fork. There are two 3 x 3 mm chips near it. The damage was incurred by the handlebars rubbing against the fork blades when the bike was being transported in a travel case. There is flaking in the finish around the first cable stop in the top tube where a corroded ferrule was drilled out. The resulting flaking in the finish was painted over. There is flaking around the front brake mount. There is a 4 mm x 4 mm abrasion on the side of the drive-side down tube just under the “C” in Cervelo. There is wear on the drive-side chain stay behind the bottom bracket from a bootie. There is wear on the bottom of the bottom bracket shell from road grit. There is wear on the underside of the front fork crown from road grit. There is wear on the inside of the non-drive side chain stay towards the intersection with the seat tube. There is wear on the inside of the seat stays towards the intersection with the seat tube. There is wear around the drop outs. The cable housing for the front derailleur has gone missing. Water bottle cage bolts are not included.
Frame and Wheel conclusion
Frame and Wheel’s view is that the S2 is best frame set Cervelo has to offer. It is comfortable and sturdy, light and fast, reasonably priced and it has a beautiful voice that inspires new levels of dedication and performance. The 2009 model year graphics are also nice. Frame and Wheel had this frame set built up with Shimano Dura-Ace 7900, 3T bars and stem and Zipp 303 / 202 tubular wheels. It was the finest and most satisfying road bike ever for Frame and Wheel, and the new owner is likely to be satisfied too. Frame and Wheel now rides an Austro-Daimler Superleicht Carbon Di2, which is a modern day version of the bicycle Frame and Wheel raced in the 1980s and 1990s. For Frame and Wheel, this is the only marque that has a stronger and more seductive voice than the Cervelo S2; so much more, that Frame and Wheel has obtained the rights to the logo and will soon make the frame set available on the Frame and Wheel eBay Store (Please sign up for the newsletter to be informed of timing). Regardless, this Cervelo S2 is a fine frame set too and it has many more hours of racing and training remaining in its carbon fiber. The new owner will no doubt be inspired by its performance, its look, its voice and most certainly the price at which it was obtained.
Specifications:
Brand: Cervelo
Model: S2
Model year: 2009
Size: 51 cm
Color: Black / Red
Frame material: carbon
Fork material: carbon
Fork model: 3T Funda Pro
Design: compact
Wheel size: 700c
Frame and Wheel rating: Good condition
Following measurements are by Frame and Wheel
Total weight: 1.67 kg / 3 pounds 11 ounce (frame: 1,080 g fork: 370 g seat post: 160 g headset and cap: 60 g).
Center of BB to top of seat tube: 49.5 cm (c-t)
Effective top tube length: 51.5 cm (c-c)
Front fork length: 37.0 cm
Following measurements are by Cervelo (73 degree seat tube angle)
Top tube length: 53.0 cm
Head tube length: 12.0 cm
Head tube angle: 73.0 degrees
Seat tube angle: 73.0 degrees
Chain stay length: 39.9 cm
Front center: 55.8 cm
Bottom bracket drop: 6.8 cm
Wheel base: 98.4 cm
Stand over: 72.9 cm
Stack: 52.2 cm
Reach: 37.0 cm
Front fork
Model: 3T Funda Pro carbon: red finish, aero blades, carbon drop outs safety tabs.
Year: 2008
Weight: 370 g
Steer tube serial number: CVF01K14308111257C
Crown serial number: CF143208M0030
Steer tube material: carbon
Steer tube diameter: 1 1/8 inch
Steer tube length: 18.5 cm (base of crown race to top) previously cut
Crown race diameter: 30 mm
Drop outs: carbon
Brake type: caliper
Other specifications
Seat post: Cervelo carbon aero
Seat post length: 26.0 cm (bottom to center rails) uncut
Seat post collar: alloy single bolt
Seat clamp: alloy double bolt
Bottom bracket: English standard 68 mm (1.370 inch x 24 tpi)
Headset: Cane Creek integrated sealed cartridge bearing (2) 36 x 45
Spacers: none
Drop outs: rear: vertical alloy front: standard carbon
Rear derailleur hanger: alloy replaceable
Front derailleur hanger: riveted, alloy for braze-on
Cabling: internal on top tube and down tube, external on chain stay for rear derailleur
Rear fork spacing: 130 mm
Front fork spacing: 100 mm
Clear Your Gear pilot program
Frame and Wheel would like to test out the Clear Your Gear program with this transaction: Use the box in which you receive this frame set and the pre-paid return postage sticker that will be enclosed to send back your old frame set or any other unused or unwanted cycling equipment to Frame and Wheel Auction Services. Frame and Wheel Auction Services will auction your old items on your behalf and forward the proceeds to you net of a commission. This defrays the cost of your new frame set, produces some cash for new items and reduces cycling equipment clutter in your home. Please advise Frame and Wheel if this is of interest to you and we can work out the details.
Box dimension: 37 inches x 22 inches x 8 inches
Weight: 10 pounds
No comments:
Post a Comment