OEM 54cm carbon frame set integrated stem aero bar BB86 time trial straight

Sold: $551  Buyer: Ireland

Comments

The frame was purchased new in 2014. It was used once. It has been in storage. The The frame set as shown weighs 7 pounds 9 ounces (3.4 kg). No serial number. Please see 70 images of the frame set on the Frame and Wheel Flickr Page.

Review of condition

The drive side bottom bracket bearing feels very rough and should be replaced. The upper head set bearing is missing. The lower head set bearing race does not stay in place properly. The There is light wear on the bottom of the bottom bracket shell. There is wear around the front and rear drop outs. There is wear around the base of the stem.

Specifications:

Brand: OEM

Size: 54 cm 

Color: nude carbon / black

Frame material: carbon

Frame serial number: none

Fork material: carbon

Steer tube diameter: 1 1/8 inch to 1 1/2 inch

Steer tube length: 100 mm cut

Series: time trial triathlon

Wheel size: 700c

Frame and Wheel rating: Good condition

Following measurements are by Frame and Wheel

Total weight: 3.4 kg / 7 pounds 9 ounces 

Center of BB to top edge of seat tube: 55.0 cm (c-t)

Center of BB to center rails of seat post when set at minimum insert : 73.0 cm (c-c)

Effective top tube length: 57.0 cm (c-c)

Head tube length: 9.3 cm

Seat post length: 9.0 cm (bottom of seat post to minimum insert)

Seat post length: 27.0 cm (minimum insert to center rails)

Seat post length: 30.0 cm (bottom of seat post to center rails)

Seat post length: 35.0 cm (bottom of seat post to top of seat)

Other specifications

Bottom bracket: BB86 for 24 mm diameter spindle

Aero bas bar width: 40 cm

Extension bars length: 340 mm

Stem length: 110 mm

Cane Creek Standardized Headset Identification System (SHIS): IS42/28.6  IS52/40

Drop outs: rear: horizontal front: standard

Rear derailleur hanger: replaceable

Front derailleur hanger: bolt mounted alloy for braze-on

Rear fork spacing: 130 mm

Front fork spacing: 100 mm

2013 BMC Teamelite TE01 29 large 53.5cm carbon frame BB92 BMC carbon seat post crosscountry

Sold: $821  Buyer: Greece

Review of condition

45 mm x 35 mm area of abrasion on drive side chain stay where chain stay protector was mounted. Chain stay protector is missing. 5 mm x 5 mm chip on outside surface of drive side chain stay. Light wear on bottom of bottom bracket shell. Light wear on underside of down tube. Light wear at the bottom of rear facing surface of the seat tube. Light wear on seat post from installation and removal. Frame was used for one race. Please see 80 images of the frameset on the Frame and Wheel Flickr Page. Ships in new custom frame set box.

Specifications:

Brand: BMC

Model: Teamelite TE01 29

Model year: 2013

Size: 53.5 cm 

Color: earth tone

Frame material: carbon

Frame serial number: 3M13A0037

Fork material: carbon

Fork model: none

Series: Cross country series mountain

Wheel size: 29er

Frame and Wheel rating: Good condition

Following measurements are by Frame and Wheel

Total weight: 1.5 kg / 3 pounds 5 ounces (frame: 1,200 seat post: 215 g headset bottom bracket adapter and fittings: 125 g).

Effective top tube: 60.0 cm (c-c)

Center of BB to top of seat tube: 54.0 cm (c-t)

Center of BB to top of seat with seat post at minimum insert: 90.0 cm

Center of BB to top of seat with seat post at full insert: 70.0 cm

Head tube length: 11.0 cm

Seat post length: 9.0 cm (bottom of seat post to minimum insert)

Seat post length: 31.0 cm (minimum insert to center rails)

Seat post length: 40.0 cm (bottom of seat post to center rails)

Seat post length: 45.0 cm (bottom of seat post to top of seat)

Following measurements are by BMC

Rider height: 180 - 195 cm

Stack: 62.8 cm

Reach: 45.0 cm

Seat tube length (BB center to top): 53.5 cm

Top tube length horizontal: 63.1 cm

Head tube length: 11.0 cm

Seat tube angle: 73.5 degrees

Head tube angle: 70.0 degrees

Rear center: 42.9 cm

Front center: 70.5 cm

Wheel base: 112.6 cm

BB drop: 6.5 cm

BMC Teamelite TE01 29 geometry

Seat post:

Brand: BMC

Seat clamp type: double bolt

Seat clamp material: aluminum

Head material: carbon

Seat clamp bed dimensions: 42 mm x 32 mm

Weight: 215 g

Offset: 3 degrees

Seat post diameter: 27.2 mm

Seat post length: 9.0 cm (bottom of seat post to minimum insert)

Seat post length: 31.0 cm (minimum insert to center rails)

Seat post length: 40.0 cm (bottom of seat post to center rails)

Seat post length: 45.0 cm (bottom of seat post to top of seat)

Other specifications

Bottom bracket: BB92 / SM-BB71

Cane Creek Standardized Headset Identification System (SHIS): IS41/28.6  IS52/40.0

Headset: OEM

Spacers: none

Drop outs: rear: vertical front: standard

Rear derailleur hanger: replaceable

Front derailleur hanger: bolt mounted

Cabling: external down tube and chain stay

Rear fork spacing: 140 mm

Rear disc brake mount length (c-c): 73 mm

2013 BMC TM01 Timemachine medium frameset BB30 integrated brakes stem time trial

Sold: $2,225  Buyer USA

Review of condition

5 mm x 5 mm abrasion on outside surface of drive side down tube near bottom bracket. Old adhesive drive side bottom bracket shell from power meter magnet. Marks from Sharpie marker on seat post. Wear around drop outs. Brake pads show wear. Includes additional P2P head set parts, brake pads and bolts. Ships in custom frame set box. Please see 90 images of the frameset on the Frame and Wheel Flickr Page. 

Specifications:

Brand: BMC

Model: TM01 Timemachine

Model year: 2013

Size: medium

Color: black red

Frame material: carbon

Frame serial number: 4RB3J0029

Fork material: carbon

Fork model: BMC

Series: time trial triathlon

Wheel size: 700c

Cable routing: electronic / mechanical

Frame and Wheel rating: Very good condition

Following measurements are by Frame and Wheel

Total weight: 2.4 kg / 5 pounds 5 ounces (frame: 1,500 fork: 620 g seat post: 260 g headset stem fittings: 425 g).

Effective top tube: 55.0 cm (c-c)

Center of BB to top of seat tube: 54.0 cm (c-t)

Center of BB to top of seat with seat post at minimum insert: 84.0 cm

Center of BB to top of seat with seat post at full insert: 69.0 cm

Head tube length: 12.3 cm

Seat post length: 9.0 cm (bottom of seat post to minimum insert)

Seat post length: 26.0 cm (minimum insert to center rails)

Seat post length: 35.0 cm (bottom of seat post to center rails)

Seat post length: 40.0 cm (bottom of seat post to top of seat)

Following measurements are by BMC

Stack: 51.5 cm

Reach: 41.8 cm

Seat tube length (BB center to top): 54.0 cm

Top tube length horizontal: 53.7 cm

Head tube length: 12.3 cm

Seat tube angle: 77 degrees

Head tube angle: 71.5 degrees

Rear center: 41.0 cm

Front center: 62.4 cm

Wheel base: 100.4 cm

BB drop: 6.8 cm

Chain stay length: 40.5 cm

Fork length: 36.4 cm

Fork rake: 5.0 cm

Trail: 6.0 cm

BMC TM01 Timemachine geometry

Front fork

Brand: BMC

Model: BMC Aero Hinge

Weight: 620 g

Serial number: ML 12111415

Crown material: carbon

Steer tube material: carbon

Steer tube diameter: 1 1/8 inch (28.0 mm) to 1 1/8 inch

Steer tube length: na

Crown race diameter: na

Drop outs: carbon with safety tabs

Brake type: integrated caliper

Seat post:

Brand: BMC

Seat clamp type: single bolt

Seat clamp material: aluminum

Head material: aluminum

Seat clamp bed dimensions: aero

Weight: 260 g

Offset: variable + 21 / + 7  -7 / -21 degrees

Seat post diameter: aero

Seat post length: 9.0 cm (bottom of seat post to minimum insert)

Seat post length: 26.0 cm (minimum insert to center rails)

Seat post length: 35.0 cm (bottom of seat post to center rails)

Seat post length: 40.0 cm (bottom of seat post to top of seat)

Other specifications

Bottom bracket: Press Fit 30

Stem: P2P 90 mm to 110 mm

Cane Creek Standardized Headset Identification System (SHIS): IS41/28.6  IS41/30

Headset: OEM

Spacers: none

Drop outs: rear: horizontal front: standard

Rear derailleur hanger: replaceable

Front derailleur hanger: rivet mounted alloy for braze-on

Cabling: internal top tube, down tube and chain stay

Rear fork spacing: 130 mm

Front fork spacing: 100 mm

2006 Trek 5.2 Madone 54cm frame set English BB Bontrager carbon fork road

Sold: $400  Buyer: USA

2006 Trek 5.2 Madone 54cm frame set English BB Bontrager carbon fork road

Frame and Wheel is offering a Trek 5.2 Madone frame set on the Frame and Wheel eBay Store. The frame was obtained new. It was never ridden. The bike was parted out and the frame set has been in storage. It has had only one owner. The owner is selling because he does not need it. The frame set features Bontrager Race X Lite carbon front fork and English thread bottom bracket. The frame features cut away seat post, aero down tube, external cup head tube bore, braze-on front derailleur hanger, metallic grey finish and the specter of Lance Armstrong. The frame set as shown weighs 4 pounds 3 ounce (1.9 kg). The frame serial number reads WL3405149. The front fork serial number reads 230279. There are 70 images of the frame set on Frame and Wheel’s Flickr page. Please take a look. No head set or seat post included.

Review of condition

The frame set is in very good condition. It is clean and ready for build. There are no bends, bulges or cracks that raise concerns about the structural integrity of the frame. The rear triangle is in alignment with the centerline of the frame. The rear derailleur hanger is undamaged. There are no obstructions in the brake cable openings. There is no corrosion in the water bottle bolt holes. The bottom bracket shell is not damaged.  The bottom bracket threads are not stripped or corroded. The front derailleur hanger is not damaged and it is attached securely. There are no cracks, bulges, discoloration, flexing or flaking that raise concerns about the structural integrity of the front fork. The crown race is not damaged. The seat clamp works properly. Frame and Wheel notes that part of the chain guard sticker is peeling

Specifications:

Brand: Trek

Model: 5.2 Madone

Model year: 2006

Size: 54 cm 

Color: grey metallic

Frame material: carbon

Frame serial number: WL3405149

Fork material: carbon

Fork model: Bontrager Race X Lite

Design: traditional top tube 

Series: road

Wheel size: 700c

Frame and Wheel rating: Very good condition

Following measurements are by Frame and Wheel

Total weight: 1.9 kg / 4 pounds 3 ounces (frame: 1,400 fork: 440 g fittings: 60 g).

Center of BB to top edge of seat tube: 54.0 cm (c-t)

Effective top tube length: 54.0 cm (c-c)

Head tube length: 10.4 cm

Front fork

Brand: Bontrager

Model: Race X Lite

Weight: 440 g

Serial number: 230279

Crown material: carbon

Steer tube material: aluminum

Steer tube diameter: 1 1/8 inch (28.0 mm)

Steer tube length: 19.5 cm (base of crown race to top) 

Crown race diameter: 30 mm

Drop outs: alloy with safety tabs

Brake type: center pull cantilever

Other specifications

Bottom bracket: English

Cane Creek Standardized Headset Identification System (SHIS): EC34/28.6  EC34/30.0

Headset: none

Spacers: none

Drop outs: rear: vertical alloy front: standard alloy

Rear derailleur hanger: replaceable

Front derailleur hanger: screw on for braze-on

Cabling: external

Rear fork spacing: 130 mm

Front fork spacing: 100 mm

Vintage Look Bernard Hinault Equipe 56cm steel frame fork English BB Reynolds 753 Cinelli

Sold: $810  Buyer: United Kingdom

Vintage Look Bernard Hinault Equipe 56cm steel frame fork English BB Reynolds 753 Cinelli

Comments

The frame has been in storage. The frame set as shown weighs 5 pounds 11 ounces (2.6 kg). Serial number is B45 S45.

Review of condition

The rear triangle is 4.0 mm left of center (the width of three pennies). There is a 10 mm x 60 mm area of corrosion on the drive side top tube. There is corrosion around the cable guides on the top tube. There is wear on the inside and outside surfaces of the chain stays. There is wear on the head tube. There is wear and corrosion on the bottom of the bottom bracket. There is corrosion around the water bottle mounts. There is wear on the drop outs. The seat collar bolt is missing.

Specifications:

Brand: Look

Model: Bernard Hinault Equipe

Model year: Mid 1980s

Size: 56.0 cm

Color: Look panels on metallic off white

Frame material: steel Reynolds 753

Frame serial number: B45 S45

Fork material: steel

Steer tube diameter: 1 inch to 1 inch

Design: horizontal top tube 

Series: road

Wheel size: 700c

Frame and Wheel rating: Good condition

Following measurements are by Frame and Wheel

Total weight: 2.6 kg / 5 pounds 11 ounces 

Center of BB to top edge of seat tube: 56.0 cm (c-t)

Effective top tube length: 54.0 cm (c-c)

Head tube length: 13.5 cm

Other specifications

Bottom bracket: English

Cane Creek Standardized Headset Identification System (SHIS): EC30/25.4  EC30/26

Headset: Ritchey Logic

Spacers: na

Drop outs: vertical

Rear derailleur hanger: non replaceable

Front derailleur hanger: clamp-on

Cabling: external

Rear fork spacing: 130 mm

New 2014 Mavic Cosmic CXR 80 T tubular wheelset Yksion 700x23mm tires Shimano 10/11-speed 16/20 spoke Mavic SSC hubs 700c road time trial

Sold: $2,500  Buyer: USA 

New 2014 Mavic Cosmic CXR 80 T tubular wheelset Yksion 700x23mm tires Shimano 10/11-speed 16/20 spoke Mavic SSC hubs 700c road time trial

Frame and Wheel is offering a Mavic Cosmic CXR 80 T tubular wheel set on the Frame and Wheel eBay Store. The wheels were purchased new in 2014. They were never ridden. They were used for display purposes. They have had only one owner. The owner is selling them because he no longer needs them. The wheels feature carbon tubular rims, CXR 01 Blades, Shimano 10/11-speed free hub, Mavic SSC hubs, 80 mm rim depth, 27 mm rim width, 16 (F) / 20 (R) spoke count, Mavic stainless steel skewers, black Cosmic stickers, nude carbon finish, Mavic quality and deep dish cool. The wheels as shown weigh 5 pounds 3 ounces (2.4 kg). There are 40 images of the wheel set at Frame and Wheel’s Flickr page. Ships in new custom wheel boxes. Original instructions included.

Review of condition

The wheels are in excellent condition. They are new. They are clean. They are ready to ride. The hubs spin smoothly and freely. The spokes are tight and straight. The rims are round and the wheels are true. There is no lateral or vertical variation in the rims when placed in a truing stand. There are no cracks, flexing or flaking in the carbon rim or the carbon shell. There are no notches in the free hub body splines from a cassette. There are no cracks in the hub bodies. There are no cracks in the flanges of the hubs. There is no corrosion on the spokes, the nipples or on the skewers. The stickers are not peeling off. The skewers are straight and complete. Frame and Wheel notes that there is only one valve extender included.

Specifications

Front

Brand: Mavic

Model: Cosmic CXR 80 T

Year: 2014

Rim material: carbon

Rim shell material: carbon

Series: road time trial

Type: tubular

Rim serial number: AF21570018

Size: 700c

Weight with tire and skewer: 2 pound 6 ounce / 1.1 kg

Spoke count: 16

Spokes: steel bladed black external nipples

Lacing: radial

Hub: Mavic SSC

Hub material: carbon aluminum

Skewer: Mavic stainless steel

Rim depth: 80.0 mm (measured by Frame and Wheel)

Rim width: 27.0 mm (measured by Frame and Wheel)

Tire: Yksion Griplink 700 x 23 mm

Over Lock Nut Dimension: 100 mm

Finish: Nude carbon

Frame and Wheel rating: Excellent condition

Rear

Brand: Mavic

Model: Cosmic CXR 80 T

Model year: 2014

Rim material: carbon

Rim shell material: carbon

Type: tubular

Series: road time trial

Rim serial number: AR21530023

Size: 700c

Rear wheel weight with tire, skewer: 2 pounds 13 ounces / 1.3 g

Spoke count: 20

Spokes: steel bladed black external nipples

Lacing: 1-cross drive side radial non drive side

Hub: Mavic SSC

Hub material: carbon aluminum

Skewer: Mavic stainless steel

Rim depth: 80.0 mm (measured by Frame and Wheel)

Rim width: 27.0 mm (measured by Frame and Wheel)

Tire: Yksion Griplink 700 x 23 mm

Over Lock Nut Dimension: 130 mm

Free hub: Shimano 10 / 11 speed

Free hub body width: 37.0 mm

Finish: Nude carbon

Frame and Wheel rating: Excellent condition

2012 Zipp 808 Firecrest tubular carbon wheelset Shimano 10-speed 16/20 spoke Zipp 88/188 hub

Sold: $1,151  Buyer: Ireland

2012 Zipp 808 Firecrest tubular carbon wheelset Shimano 10-speed 16/20 spoke Zipp 88/188 hub

Frame and Wheel is offering Zipp 808 Firecrest tubular wheels on the Frame and Wheel eBay Store. The wheels were purchased new in 2012. They were used for demonstration and display purposes. They were glued up and ridden only a few times. They have been in storage. They have had only one owner. The owner is selling them because he no longer uses them. The wheels feature carbon tubular rim, carbon shell, ABLC dimpled rim shell surfaces, Shimano 10-speed free hub, Zipp 88 front hub and Zipp 188 rear hub, 82 mm rim depth, 26 mm rim width, 16 (F) / 20 (R) spoke count, adjustable hubs, Zipp stainless steel skewers, Beyond Black lettering, aero design and Zipp 808 cool. The wheels as shown weigh 3 pounds 8 ounces (1.6 kg). There are 40 images of the wheel set at Frame and Wheel’s Flickr page. Ships in new custom wheel boxes.

Review of condition

The wheels are in very good condition. They are clean and they are ready to ride. The hubs spin smoothly and freely. The spokes are tight and straight. The rims are round and the wheels are true. There is no lateral or vertical variation in the rims when placed in a truing stand. There are no cracks, flexing or flaking in the carbon rim or the carbon shell. There is only one notch in the free hub body splines from a cassette. There are no cracks in the hub bodies. There are no cracks in the flanges of the hubs. There is no corrosion on the spokes, the nipples or on the skewers. The stickers are not peeling off. The skewers are straight and complete. There is no glue no the rims. Frame and Wheel notes that there is light wear on the braking surfaces of rims.

11-speed conversion

The Zipp 188 rear hub can be converted to 11-speed. The conversion requires a new axle, end cap, free hub body and spacer and a re-dish of the wheel. The upgrade is available through authorized Zipp dealers. Please see this link to Zipp website for more information about the conversion.

Frame and Wheel conclusion

Frame and Wheel’s view is that this Zipp 808 Firecrest tubular wheel set will make an excellent choice for the dedicated road cyclist who seeks a set of tubular wheels for racing and training. The wheel set shows no wear and it is effectively new. These wheels will materially transform the weight, look and feel of any road bike and will help trigger triumphant performance revelations for the new owner. An excellent opportunity to obtain one of Zipp’s coolest wheel sets. 

Specifications

Front

Brand: Zipp

Model: 808 Firecrest

Year: 2012

Rim material: carbon VCLC

Rim shell material: carbon ABLC

Series: road time trial

Type: tubular

Rim serial number: na

Hub serial number: Z0701120025

Size: 700c

Weight with skewer: 1 pound 10 ounce / 740 g

Spoke count: 16

Spokes: steel bladed black external nipples

Lacing: radial

Hub: Zipp 88

Hub material: alloy

Skewer: Zipp stainless steel

Rim depth: 82.0 mm (measured by Frame and Wheel)

Rim width: 26.0 mm (measured by Frame and Wheel)

Tire: not included

Over Lock Nut Dimension: 100 mm

Finish: Beyond Black

Frame and Wheel rating: Very good condition

Rear

Brand: Zipp

Model: 404 Firecrest

Model year: 2012

Rim material: carbon VCLC

Rim shell material: carbon ABLC

Type: tubular

Series: road time trial

Rim serial number: na

Hub serial number: Z030412-0241

Size: 700c

Rear wheel weight with skewer: 1 pounds 14 ounces / 840 g

Spoke count: 20

Spokes: steel bladed black external nipples

Lacing: 1-cross non drive side radial drive side

Hub: Zipp 188

Hub material: alloy

Skewer: Zipp stainless steel

Rim depth: 82.0 mm (measured by Frame and Wheel)

Rim width: 26.0 mm (measured by Frame and Wheel)

Tire: not included

Over Lock Nut Dimension: 130 mm

Free hub: Shimano 10 speed

Free hub body width: 34 mm

Finish: Beyond Black

Frame and Wheel rating: Very good condition