2009 Campagnolo Super Record 11-speed Ultra-Torque crankset 53T/39T double 180 mm road

Sold: $230  Buyer USA

2009 Campagnolo Super Record 11-speed Ultra-Torque crankset 53T/39T double 180 mm road

Frame and Wheel is auctioning a Campagnolo Super Record 11 speed crank set on the Frame and Wheel eBay Store. The crank set was purchased new in 2012. It was installed a road bike that was ridden for less than 700 training miles and then placed in storage. The crank set was parted out earlier this year. The crank set features titanium semi-axles, ceramic bearings, hollow carbon crank arms (180 mm length) and eleven speed chain rings (53T/39T). The crank set is in very good condition. It is clean and ready for installation. The chain rings are not bent and the teeth are not chipped or broken. The chain ring bolts are not stripped or missing. The crank arm bolt is included and undamaged. The bolt holes for the pedals are not stripped. There is no corrosion anywhere on the crank set. The axle interface is not stripped or damaged. The bearings turn smoothly. Frame and Wheel notes the following. There is a 4 mm x 6 mm abrasion on the end of the drive side crank arm. The chain ring teeth show wear. An excellent opportunity to obtain a very lightly used top of the line Campagnolo crank set crank set. Please see additional images at the Frame and Wheel Flickr Page.

Specifications

Brand: Campagnolo

Model: Super Record 11 

Model: FC9-SR893C Ultra Torque Ultra Hollow CULT

Serial number: drive-side arm: 0000300577  non drive-side arm: 0000300576

Model year: 2009

Crank arm and spider material: carbon

Bottom bracket type required: Campagnolo Super Record Ultra-Torque BB cups (not included)

Chain rings: 53T outer 39T inner Campagnolo 11s

Type: Double

Series: Road

Crank arm length: 180.0 mm

Bolt circle diameter: 135 mm

Pedal threads: 9/16 x 20 F English

Weight: 611 g

Q-Factor: 145.5 mm

Finish: Black

Frame and Wheel rating: Very good condition

CompuTrainer Pro training system hardware software wheel block

Sold: $870 Buyer USA
CompuTrainer Pro training system hardware software wheel block

Frame and Wheel is auctioning a CompuTrainer Pro stand alone training system on the Frame and Wheel eBay Store. The system was purchased new in 2007. It has had only one owner. It was used by the owner for training. The system is being sold because it is no longer needed. The system features CompuTrainer Pro electronic load generator, CompuTrainer Pro load generator stand, front wheel block, CompuTrainer Plus microprocessor handlebar controller and bracket, cadence sensor with velcro strap and magnet; ten foot DIN cable, fifteen foot right angle stereo cable, Wireless Heart Rate sensor, CompuTrainer Stand Alone Users Guide (July 2007), CompuTrainer 3D Software Users Guide (July 2007), CompuTrainer Coaching Software Users Guide (July 2007), CompuTrainer 3D with Drag Factor software, CompuTrainer Race Platform Plans, Wireless Heart Rate Receiver sheet, Velcro Cadence Attachment sheet, and CompuTrainer Insert Me First CD-ROM. The electronic load generator and stand weighs 23 pounds. The serial number on the electronic load generator reads 29738LG. The serial number on the microprocessor reads 29323HB. Wireless heart rate strap not included. USB to serial adapter not included. PC interface not included. Please see 70 additional images of the system and demonstration videos of the microprocessor in action Frame and Wheel’s Flickr page. The new owner can download for free the original 3D software from RacerMate’s website. A new version is available for purchase. A variety of accessories and support services can be obtained directly from RacerMate.

Review of condition

Frame and Wheel set up the CompuTrainer system in Stand Alone mode and tested all of its functions to ensure that it works properly. Frame and Wheel did not connect the CompuTrainer to a PC. Frame and Wheel does not have a compatible heart rate sensor chest strap and thus is unable to test the heart rate function. The CompuTrainer is in good condition. It is clean and ready for use. The electronic load generator produces resistance and powers up properly. The drum on the load generator is not damaged. The casing of the load generator is not damaged. The CompuTrainer Pro stand adjusts properly and is not corroded. The connection pins on the cables are not damaged or corroded. The microprocessor display works properly and cycles through its various pages properly. The Stand Alone modes (Rolling Resistance Calibration, Ergometer Mode and General Exercise mode) all function properly. The cadence sensor works properly. All of the instruction manuals are included. Frame and Wheel notes the following. There is a 5 mm x 15 mm scratch on the upper left side of the microprocessor screen. The casing of the power supply adapter was cracked and is reinforced with electrical tape. The original crank arm magnet is missing and is replaced with a wheel magnet. One of the plastic end covers for the load generator stand is broken. The CompuTrainer Pro stand is missing its adjustable feet as it was attached to a RacerMate race platform.

Frame and Wheel conclusion

Frame and Wheel’s view is that this CompuTrainer Pro will make an excellent choice for the cyclist or triathlete who seeks a dedicated indoor training system that uses software to provide entertaining and productive video workouts. The system is in good condition and ready for use. The system is compact, relatively quiet and allows for the use of an existing road bike. It can also be used as a “stand-alone” trainer that measures watts, heart rate, speed and distance. The new owner will quickly discover how challenging and productive training on a CompuTrainer can be and will no doubt notice the improvements in performance. A fine opportunity to obtain an excellent training tool.

Electronic Load Generator Specifications

Brand: Racermate

Model: CompuTrainer Pro

Model Year: 2007

Serial number: 29738LG

Weight with stand: 40 pounds

Finish: Blue

Frame and Wheel rating: Good condition

Microprocessor handlebar controller specifications

Brand: Racermate

Model: CompuTrainer Plus

Model number: Model 8002

Serial number: 29323HB

Weight with bracket: 240 g

Finish: yellow

Power supply specifications

Brand: Racermate

Model: 66-220-2500A

Voltage: 120 volts

Summary of hardware items included

• CompuTrainer Pro load generator
• CompuTrainer Pro load generator stand
• Front wheel block
• CompuTrainer Plus Model 8002 microprocessor handlebar controller and bracket
• Power supply
• 10 foot microprocessor to electronic load generator cable DIN cable
• Cadence sensor cable, velcro strap and magnet
• 15 foot right angle stereo cable
• Wireless Heart Rate sensor
• Four screws for mounting to Race Platform (not included)
• Rear wheel skewer

Summary of software items included

• Computrainer Insert Me First!
• CompuTrainer 3D with Drag Factor

Summary of manuals included

• CompuTrainer Basic Hardware and Electronics Stand Alone Users Guide July 2007
• CompuTrainer 3D Software Users Guide July 2007
• CompuTrainer Coaching Software Users Guide July 2007
• Read me first
• PC System requirement & set up notes
• Computrainer Race Platform plan
• Window Vista User information
• Racermate software agreement
• CompuTrainer Race Platform Plans
• Wireless Heart Rate sensor
• Velcro Cadence Attachment sheet

More information about Computrainer Pro System

Frame and Wheel demonstration video: calibration mode

Frame and Wheel demonstration video: Ergometer mode

Frame and Wheel demonstration video: General Exercise mode

1990s KHS Aero track bike steel Velocity Deep V rims American Classic hubs Sugino 75 cranks KHS track fork

Sold: $230  Buyer: United Kingdom
1990s KHS Aero track bike steel Velocity Deep V rims American Classic hubs Sugino 75 cranks KHS track fork

Frame and Wheel is auctioning a KHS Aero track bike on the Frame and Wheel eBay Store. The bicycle was a gift to the current owner. It was used for commuting. It has been in storage. The owner is selling it because he does not use it anymore. The frame set features steel construction, track bike geometry, Oschner front fork, UNO seat post, horizontal rear drop outs, distinctive “aero” seat tube, external cups head set (1 inch diameter), blue purple fade finish and 1990s track bike cool. The bicycle features Sugino SG 75 crank set (44T with 170 mm crank arms), Shimano rear sprocket (18T), Shimano Ultegra front brake, Avid brake lever, Race Face flat bars (47 cm e-e), 3T stem (95 mm), Selle San Marco seat, Shimano Deore XT pedals, blue Velocity Deep V rims with American Classic track hubs and Michelin and Soma tires. The bicycle as shown weighs 20 pounds 14 ounces (9.0 kg). The serial number on the bottom bracket reads U41206495. Stand over is 79.0 cm. Includes original KHS track fork. There are 140 images of the bicycle on the Frame and Wheel Flickr Page. Please have a look.

Review of condition

The bicycle is in good condition. It is clean and ready to ride. The brake activates easily and grips well. The cable housing is not cracked. The hubs spin smoothly and freely. The spokes are tight and straight. The rims are round. There is no lateral variation in the rims when placed in a truing stand. There are no dents or cracks in the rims. There is no corrosion on the spokes. There are no cracks in the hub bodies. There are no cracks in the flanges of the hubs. The tires hold pressure. There are no dents, bends or bulges that raise concerns about the structural integrity of the frame. The rear drop outs are undamaged. The rear triangle is in alignment with centerline of the frame. There is no corrosion on the frame. There are no dents bends or bulges that raise concerns about the structural integrity of the front forks. The steer tubes do not show any cracks or bulges. The external cups are mounted securely and are undamaged. The head set is complete. The head set bearings turn smoothly. There is no play in the bottom bracket. The handlebars are not bent. The bar ends are secured firmly. The seat post is not damaged. The seat binder is not damaged. None of the seat clamp parts are missing. The seat rails are undamaged. The chain does not read 0.75 or 1.0 on the chain wear tool. Frame and Wheel notes the following. The finish on the frame shows wear. There are numerous chips and scratches in the finish on the down tube, the seat tube, the seat stays and the chain stay. The finish on the road front shows wear. The brake lever surface shows wear. The brake cable is frayed. The seat surface shows wear. There is corrosion on the front and rear hub bolts. The braking surface of the front rim shows wear. The seat post shows wear from installation and removal. There is light surface corrosion on the chain. The pedals show wear. The tires show wear. 

Frame and Wheel conclusion

Frame and Wheel’s view is that this KHS Aero will make an excellent choice for the cyclist who seeks a practical entry level track bike. It will also suit the urban cyclist who seeks something hip and pure for the commute to the start up downtown. Although the bike shows wear, it is nevertheless in good condition and its is ready to return to the track or the streets. The new owner will appreciate the bike’s steel construction, the road bike front fork, the cool wheels, the distinctive blue purple fade finish, the funky aero seat tube and the comfort of the flat handlebars. A rare opportunity to simultaneously obtain a classic track bike and some street cool.

Specifications:

Brand: KHS

Model: Aero

Model year: 1998 estimated

Size: 55 cm

Color: Blue Purple fade

Frame material: True Temper steel

Frame design: track

Frame serial number: U41206495

Fork material: steel

Road fork model: Oschner 

Track fork model: KHS

Fork serial number: na

Wheel size: 700c

Frame and Wheel rating: Good condition

Following measurements are by Frame and Wheel

Total weight with wheels: 20 pounds 14 ounces (9 kg)

Center of BB to top of seat tube: 55.0 cm 

Effective top tube: 56.0 cm (c-c)

Seat post length: 37.0  cm mm (bottom end of seat post to center rails)

Stand over height from middle of top tube: 79.0 cm 

Bottom bracket height: 28.0 cm

Head tube length: 14.0 cm

Wheelbase: 96 cm

Front fork road

Brand: Oschner

Steer tube material: Columbus steel

Steer tube diameter: 1 inch

Steer tube length: 18.0 cm (base of crown race to top)

Crown material: steel

Finish: red

Crown race diameter: 26 mm

Drop outs: steel

Safety tabs: no

Brake type: caliper

Front fork road

Brand: KHS

Steer tube material: steel

Steer tube diameter: 1 inch

Steer tube length: 18.0 cm (base of crown race to top)

Crown material: steel

Finish: blue

Crown race diameter: 26 mm

Drop outs: steel

Safety tabs: no

Brake type: caliper

Handlebar

Brand: Race Face

Finish: Chrome

Design: Flat

Material: aluminum

Bend: zero

Upsweep: zero

Rise: zero

Width: 47 cm (e-e)

Handlebar clamp: 25.6 mm

Bar ends: Oury

Stem

Brand: 3T

Material: aluminum alloy

Length: 95 mm 

Steer tube diameter: 1 inch (26 mm)

Bar clamp diameter: 25.6 mm

Headset

Brand: Shimano Dura-Ace

Steer tube diameter: 1 inch (28.6 mm)

Type: external cup

Cane Creek Standardized Headset Identification System (SHIS): EC30/25.4 ∣ EC30/26

Seat post

Brand: UNO

Seat clamp type: single bolt alloy

Seat cradle dimension: 40 mm x 40 mm

Post material: alloy

Head material: alloy

Clamp material: alloy

Weight: 370 g (weighed by Frame and Wheel)

Offset: 15.0 mm

Post diameter: 26.8 mm

Seat post length: 6.5 cm (bottom end of seat post to minimum insert)

Seat post length: 31.0 cm mm (minimum insert to center rails)

Seat post length: 37.5 cm mm (bottom end of seat post to center rails)

Seat post length: 42.5 cm (bottom end of seat post to top of seat)

Finish: Black

Seat

Brand: San Marco

Model: Regal

Model year: 2002

Weight: 289 g (weighed by Frame and Wheel)

Covering: leather

Length: 280 mm

Width: 150 mm

Rails: aluminum alloy

Adjustable length of rails: 40 mm

Rail width: 40 mm c-c

Rail diameter: 7 mm

Finish: white

Crank set

Brand: Sugino

Model: Sugino 75

Model number: SG75

Crank type: 5-bolt 

Year: 2000

Chain ring: 48 single Salsa

Bolt circle diameter: 144 mm

Crank arm length: 170 mm

Spider material: alloy

Finish: chrome

Brake

Brand: Shimano

Group: Ultegra

Model: BR-6500

Year: 2001

Pads: standard

Brake lever

Brand: Avid

Finish: black

Rear sprocket

Brand: Surly

Gearing: 18T

Others

Seat tube diameter: mm

Drop outs: Shimano horizontal (R) standard (F)

Rear derailleur hanger: none

Front derailleur hanger: na

Cabling: na

Chain: KMC 9D-4

Pedals: Shimano Deore XT

Front

Rim brand: Velocity

Model: Deep V

Model year: 2000 estimated

Rim material: alloy

Type: clincher

Size: 700c

ERTO: 622 x 14C

Front wheel weight with tire and tube: 3 pounds 1 ounces (1.4 kg)

Spoke count: 32

Spokes: alloy straight gauge external nipples

Lacing: 2-cross

Hub: American Classic

Skewer: na

Rim depth: 30 mm 

Rim width: 19 mm (o-o)

Tire: Michelin Axial Pro

Over Lock Nut Dimension: 100 mm

Finish: Red

Rear

Rim brand: Velocity

Model: Deep V

Model year: 2000 estimated

Rim material: alloy

Type: clincher

Size: 700

ERTO: 622 x 14C

Rear wheel weight with tire, tube and cassette: 3 pounds 15 ounces (1.8 kg)

Spoke count: 32

Spokes: alloy straight gauge external nipples

Lacing: 2-cross

Hub: American Classic

Skewer: na

Rim depth: 30 mm 

Rim width: 19 mm (o-o)

Tire: Soma Everwear 5 mm

Over Lock Nut Dimension: 130 mm

Finish: Gold

2005 Guru Crono’Alu 51cm aluminum Shimano 105 9 speed Profile Design Ritchey Pro clincher time trial

Sold: $305  USA

2005 Guru Crono’Alu 51cm aluminum Shimano 105 9 speed Profile Design Ritchey Pro clincher time trial 

Frame and Wheel is auctioning Guru Crono Alu time trial bicycle on the Frame and Wheel eBay Store. The bicycle was purchased new in 2005. The bicycle was used for two years in sprint triathlons and for training. It has about 700 miles of use. It has had only one owner. It has never been crashed. It has been stored indoors since 2007. The owner is selling the bicycle because he no longer uses it. The frame set features Dedadacciai aluminum tubing, Dedacciai Blackstream 70 carbon fork, FSA SL 280 seat post, English thread bottom bracket, integrated head set (1 1/8 inch), bladed seat stays, integrated seat post binder, bladed seat tube, aero down tube, distinctive blue finish and Guru provenance. The bicycle features Shimano 105 front and rear derailleurs, FSA Gossamer crank set (with 53T/39T chain rings and 170 mm crank arms), Shimano 105 brake set, Profile Design Air Wing base bars Profile Design Carbon Stryke extensions, Profile Design seat and Ritchey Pro 27/28 alloy clincher wheels with Vittoria Rubino Slick tires.  The bicycle as shown weighs 20 pounds 10 ounces (9.3 kg). The owner is 5 feet 6 inches with an inseam of about 30 inches. The serial number on the bottom of the bottom bracket shell reads 412039. The serial number on the front fork steer tube reads 937074. Stand over is 74.0 cm. Pedals not included. There are 190 detailed images of the bicycle at Frame and Wheel’s Flickr page. Please take a look.

Review of condition

The bicycle is in good condition. It is clean and ready to ride. The shifting is precise and complete in all eighteen gears. The brakes activate easily and grip well. There is 5 mm of brake pad. The hubs spin smoothly and freely. The spokes are tight and straight. The rims are round. The wheels show no lateral or vertical variation when placed in the truing stand. There are no dents in the alloy rims. There are no cracks in the hub bodies. There are no cracks in the flanges of the hubs. There is no corrosion on the spokes or on the skewers. The skewers are straight and complete. The tires hold pressure. The sidewalls are not cracked. The treads are not worn. 

There are no dents, bends or bulges that raise concerns about the structural integrity of the frame. There is no road wear on the bottom of the down tube or on the back of the seat tube. The rear triangle is in alignment with the centerline of the frame to within 3.0 mm (the width of two pennies). The rear drop outs are properly aligned. The rear derailleur hanger is straight and undamaged. The front derailleur hanger is undamaged and secured firmly. There is no cracking, bulging or flexing that raise concerns about the structural integrity of the front fork. The steer tube does not show dents, bends or bulges. The crown race is secured firmly. There is no play in the bottom bracket. There is no corrosion in the seat post binder bolts. The seat post binder is complete and undamaged. The water bottle cage bolts are not stripped. The base bar is not bent. The extensions are not cracked. The arm rest pads adhere securely to the arm rests. The velcro on the arm rests is not peeling off. There are no rips or abrasions on the seat.  The chain does not read 0.75 or 1.0 on the chain wear tool. The head badge is securely attached to the head tube.

Frame and Wheel notes the following. There is a 30 mm scratch on the drive side down tube near the head tube. There are two 2 mm x 5 mm scratches on the top of the top tube near the intersection with the seat tube. There are four 2 mm x 2 mm scratches on the inside surface of the chain stay from the chain. There are four scratches on the surface of the drive side fork blade. The cable housing for the left shifter shows cracking. There are scratches on the left brake lever. The black finish of the outer chain ring shows wear. There are scratches on the base of the non drive crank arm. The seat post shows wear from installation and removal. There is a 2 mm x 5 mm scratch on the surface of front rim wall. The rubber cones on the front hub show wear. The lettering on the tires is fading. There is old adhesive on the carbon extensions. The bar tape on the right extension is peeling.

Frame and Wheel conclusion

Frame and Wheel’s view is that this Guru Crono Alu will make an excellent choice for emerging triathlete who seeks a practical but competitive entry level time trial bike. The bicycle is in good condition and shows immaterial signs of wear. The new owner of this Guru Crono Alu will appreciate the smoothness of the Shimano 105 drive train, the reliability of the Ritchey Pro wheel set and the sturdy craftsmanship of the frame set. A rare opportunity to obtain a modern day classic from Guru.

Specifications:

Brand: Guru

Model: Crono Alu

Model year: 2005

Size: 51

Color: Blue

Frame material: Aluminum

Frame design: triathlon / time trial

Frame serial number: 412039

Fork design: aero blade

Fork material: carbon

Fork model: Dedacciai Black Stream 70

Fork serial number:

Wheel size: 700c

Frame and Wheel rating: Good condition

Following measurements are by Frame and Wheel

Total weight with wheels: 20 pounds 10 ounces (9.3 kg)

Total weight without wheels: 14 pounds 4 ounces (6.4 kg)

Front wheel weight with skewer, tire and tube: 2 pounds 11 ounces (1.2 kg)

Rear wheel weight with skewer, tire, tube and cassette: 3 pounds 14 ounces (1.8 kg)

Center of BB to top of seat tube: 54.0 cm 

Effective top tube: 51.0 cm (c-c)

Seat post length from bottom to center rails:  35.0 cm

Seat post length from bottom to top of seat: 40.0 cm

Stand over height from middle of top tube: 74.0 cm 

Bottom bracket height: 27.5 cm

Head tube length: 10.3 cm

Wheelbase: 97.0 cm

Front fork

Model: Dedacciai Blackstream 70

Model year: 2005

Weight: 552 g (weighed by Frame and Wheel)

Length: 37.5 cm

Serial number: 937074

Steer tube material: aluminum

Steer tube diameter: 1 1/8 inch to 1 1/8 inch

Steer tube length: 18.0 cm (base of crown race to top)

Crown race diameter: 30.0 mm

Crown material: alloy

Drop outs: aluminum

Safety tabs: yes

Brake type: side pull cantilever

Base bar

Brand: Profile Design

Model: Air Wing OS

Material: alloy

Width: 40.0 cm

Bar clamp diameter: 31.6 mm

Drop: 30.0 mm

Reach: 150 mm

Finish: black

Brake levers: Profile Design aero

Extensions

Brand: Profile Design

Model: Carbon Stryke

Extension material: carbon

Finish: black

Type: J-bend

Length: 250 mm (end to center pads measured by Frame and Wheel)

Diameter: 22.5 mm

Arm rest: Plastic 95 mm x 100 mm with pads

Headset

Brand: FSA

Steer tube diameter: 1 1/8 inch (28.6.0 mm) to 1 1/8 inch

Type: Integrated

Cane Creek Standardized Headset Identification System (SHIS): IS41/28.6  IS41/30.0

Headset: sealed cartridge bearings FSA alloy top cap, Cane Creek bearing cover

Spacers: 1 x 15 mm 1 x 10 mm 1 x 5 mm 1 x 1mm alloy

Stem

Brand: Deda

Model: Quattro

Weight: 170 g (Measured by Frame and Wheel)

Material: aluminum alloy

Length: 9.0 cm

Rise: + / - 10 degrees

Steer tube diameter: 1 1/8 inch

Bar clamp diameter: 31.8 mm

Collar stack height: 42.0 mm

Face plate: alloy four bolts

Seat post

Brand: FSA SL 280 Alloy

Model year: 2004

Seat clamp type: single bolt 

Seat clamp material: alloy

Head material: alloy

Seat clamp bed dimensions: 40 mm x 37 mm

Weight: 325 g

Offset: 25.0 mm

Seat post diameter: 27.2 mm

Seat post length: 7.5 cm (bottom of seat post to minimum insert)

Seat post length: 27.5 cm mm (minimum insert to center rails)

Seat post length: 35.0 cm mm (bottom to center rails)

Seat post length: 40.0 cm (bottom of seat post to top of seat)

Finish: black

Seat

Brand: Profile Design

Model: time trial

Weight: 301 g (weighed by Frame and Wheel)

Covering: Synthetic

Length: 264 mm

Width: 120 mm

Rails: titanium

Adjustable rail length: 35 mm

Rail width: 45 mm c-c

Rail diameter: 7 mm

Finish: black

Crank set

Brand: FSA Gossamer

Model: CK-6020

Year: 2004

Chain rings: 53T / 39T double

Bolt circle diameter: 130 mm

Crank arm length: 170 mm

Spider material: alloy

Finish: black

Rear derailleur

Brand: Shimano

Group: 105

Model: RD-5501

Year: 2004

Cage type: Short

Drive train: 9-speed

Finish: chrome

Front derailleur

Brand: Shimano

Group: 105

Model: FD-5500

Year: 2004

Type: Braze-on

Crank set: double

Finish: Chrome

Brakes

Brand: Shimano

Group: 105

Model: BR-5501

Year: 2004

Pads: for alloy rims

Type: side pull caliper brake

Quick release: yes

Finish: chrome

Cassette

Brand: Shimano

Model: CS-HG70-9

Year: 2004

Gearing: 12, 13, 14, 15, 16, 17, 19, 21, 23

Bar end shifters

Brand: Shimano

Group: Dura-Ace 7700

Model: SL-BS7700 

Year: 2004

Speed (R): 9 speed

Speed (L): Double 

Bottom bracket

Brand: FSA

Model: MegaExo

Threading: English 

Others

Seat collar diameter: na

Drop outs: alloy vertical (R) alloy standard (F)

Rear derailleur hanger: replaceable

Front derailleur hanger: welded for braze-on

Cabling: external top tube down tube chain stay

Chain: Shimano

Pedals: not included

Bottle cages: one

Bar tape: Black

Front

Brand: Ritchey

Model: 27 DS Pro

Model year: 2004 estimated

Rim material: aluminum 6061 T6

Rim shell material: aluminum

Series: road / triathlon

Type: clincher

ETRTO: 622 x 14c

Rim serial number: T-0304992

Hub serial number: na

Size: 700c

Front wheel weight with skewer, tire and tube: 2 pounds 11 ounces (1.2 kg)

Spoke count: 20

Spokes: aluminum standard external nipples

Lacing: radial

Hub: Ritchey

Hub material: aluminum

Skewer: Ritchey

Rim depth: 27.0 mm (measured by Frame and Wheel)

Rim width: 19.0 mm (measured by Frame and Wheel)

Tire: Vittoria Rubino Slick 700 x 23C

Base tape: Ritchey

Over Lock Nut Dimension: 100 mm

Finish: Silver lettering on black

Rear

Brand: Ritchey

Model: 28 DS Pro

Model year: 2004 estimated

Rim material: aluminum 6061 T6

Rim shell material: aluminum

Type: clincher

ETRTO: 622 x 14C

Series: road / triathlon

Rim serial number: T-0305190

Hub serial number: na

Size: 700c

Rear wheel weight with skewer, tire, tube and cassette: 3 pounds 14 ounces (1.8 kg)

Spoke count: 24

Spokes: aluminum straight external nipples

Lacing: 2-cross non drive-side 2-cross drive side

Hub: Ritchey Zero System

Hub material: aluminum

Skewer: Ritchey

Rim depth: 28.0 mm (measured by Frame and Wheel)

Rim width: 19.0 mm (measured by Frame and Wheel)

Tire: Vittoria Rubino Slick 700 x 23C

Base tape: plastic Ritchey

Over Lock Nut Dimension: 130 mm

Free hub body: Shimano / SRAM

Finish: Silver lettering on black